JBW Rok and offset question

lukethompson86

T6.1 owner and all round VW enthusiast
VIP Member
Hi all

Just about to purchase a set of the JBW Roks and trying to get my head around the offsets.

Currently have some 20” by 8.5j with a 42 offset on proline stance coilovers.

Would I be right in saying 8j at the front and 9 at the back with the roks would
Work or woukd
I get away with 10’s at the back.

And any tyre size recommendations for both please?

Pics very welcome!

Thanks all
 
Plenty of room on the back so those 10" will work perfect. 9" front would work but you would need a skinny tyre.

My Rolls Royce wheels were 8.5 et25 but i ran a 225/35 tyre
 
Ok thank you.

Would
You maybe suggest 8 at the front then and 10 at the back or an 8 and a 9 respectively????

Completely baffling my brain!
 
Personally if i wanted to run load rated tyres and a staggered setup, i would go 8" front and maybe add a spacer if i thought the wheel sat in too far and a 10" rear.
 
I’ve just put the GT7’s on mine, 8.5” all round. These are ET35 though so a bit of poke at front but could do with a spacer at rear.
With a 245 40 tyre
 
I’ve just put the GT7’s on mine, 8.5” all round. These are ET35 though so a bit of poke at front but could do with a spacer at rear.
With a 245 40 tyre
Do you have any photos of these on the van? I’m tempted to buy some myself but can’t find any photos of them fitted only stock images
 
If you fancy some brand new in box 19” Navis Holey’s then I have some for sale for a hefty discount off new. They’re easier to accommodate with good quality load rated tyres and offsets are perfect.
 
Back
Top