MIB2 PQ Discover Media - Infotainment mods, upgrade, FEC / SWaP

[Robert]

Yes I did notice that, but USB works fine

Could you post your current admap?

What do you think 60100 is for?

60100 is Vehicle Interface (VEHICLE STATUS & DRIVING DATA) as per the screen shot below.

OFFROAD can be activated separately via adaptation in addition to VEHICLE STATUS & DRIVING DATA and also as you know already it exists independently on some higher revisions.

I will post my adaptation map later on.

And by the way I think we can observe an interesting pattern.
You are missing USB code but it is present and works, also @mmi is missing Car-Net on his active code list but this feature is actually active and also works fine for him.
So this leads me to conclusion that maybe some of the SWaP features don't need a code on active list to actually work

 

[Adams]

Also I Have "Car-Net" and "Media Control" active on the unit but not on the SWaP codes

 

[Robert]

@Adams (5C0035680G, SW 0449, 60100 installed) and
@mmi (5C0035680F, SW 0468, 60100 not installed and not present)
can you both perform simple test for me and post your findings/results here?
Each step is quite important so please be pedantic

1. Change your infotainment adaptation channel
ENG122227-ENG117606-Car_Function_Adaptations_Gen2-menu_display_hybrid to activated
2. Check if you have new entry in the main menu called "HYBRID".
3. If yes, click it and enter your new menu entry(as our vehicles are not hybrids there is nothing really useful)
4. While you are still in that menu change the same adaptation channel
ENG122227-ENG117606-Car_Function_Adaptations_Gen2-menu_display_hybrid to not activated
Now you should see something like below


5. Press on the screen bottom RHS car/gear icon and enter configuration menu(just for the purpose of entering that sub menu, you will adjust things later on)
6. Exit configuration by pressing top RHS twisted arrow icon once.
7. Click bottom LHS Selection icon and see what shows up there.
8. Do whatever you like, check everything, enter/access/modify/adjust

 

[tintim]

Decided to try this on my T6 (5C0035680C, SW 0245, 60100 supported, not installed) and it works
Although all I had available was offroad. Gives me something to experiment with. Thought I'd share, appreciate I'm hijacking the thread so apologies and I will stop posting if preferred.

 

[Robert]

Decided to try this on my T6 (5C0035680C, SW 0245, 60100 installed) and it works
Although all I had available was offroad. Gives me something to experiment with. Thought I'd share, appreciate I'm hijacking the thread so apologies and I will stop posting if preferred.

View attachment 58339

Well done mate
Post away, you are more than welcome!
By the way, can you confirm once again, is the code 60100 - Vehicle Interface on your installed or supported list?

 

[tintim]

Well done mate
Post away, you are more than welcome!
By the way, can you confirm once again is the code 60100 - Vehicle Interface on your installed or supported list?

Whoops typo from me I have a supported not installed 60100, I've corrected my post above (need more coffee). Thanks

 

[Robert]

Perfect, let's see what kind of news have Matti and Adam for us.

 

[Adams]

Perfect, let's see what kind of news have Matti and Adam for us.

I’ll try this later when I’m home more than happy to go messing with the adaption channels

 

[mmi]

1. Change your infotainment adaptation channel ENG122227-ENG117606-Car_Function_Adaptations_Gen2-menu_display_hybrid to activated - CHECK.
2. Check if you have new entry in the main menu called "HYBRID". - CHECK, Yes I have.
3. If yes, click it and enter your new menu entry(as our vehicles are not hybrids there is nothing really useful) - CHECK.
4. While you are still in that menu change the same adaptation channel ENG122227-ENG117606-Car_Function_Adaptations_Gen2-menu_display_hybrid to not activated - CHECK.

Now you should see something like below - Yes but no, actually no chance, still Hybrid thing - Power flow.​

5. Press on the screen bottom RHS car/gear icon and enter configuration menu(just for the purpose of entering that sub menu, you will adjust things later on) - CHECK.
6. Exit configuration by pressing top RHS twisted arrow icon once. - CHECK.
7. Click bottom LHS Selection icon and see what shows up there. - CHECK, selection box is empty (not even hidden items in there). Interestingly the Refuel range (with correct value) appeared, so there definitely is some intercommunication onboard.

No progress from here.

8. Do whatever you like, check everything, enter/access/modify/adjust
All regular things seem to work just fine. However, the unit won't turn off. Needs "long press reset". All "changes" are gone - as expected.

 

[tintim]

@mmi I had the same problem and was also disheartened, then something just worked... not sure if I did something.

 

[Deaky]

Just tried this. Exactly the same result as @mmi 60100 is supported and installed

 

[tintim]

Perhaps you could try activating another function within "car functions adaptations Gen2"?

 

[Skyliner33]

I would have had a go at this but this is what the instructions look like to me:

Nullam ac fermentum magna. Maecenas vitae auctor ligula. Aenean tristique eros nisi, non suscipit quam rhoncus vel. Cras in efficitur augue. Fusce vel mauris et justo convallis rhoncus eget vehicula sem. Duis nunc purus, condimentum id neque hendrerit, laoreet dignissim sapien. Curabitur eget mattis enim, et congue neque. Fusce tellus justo, condimentum at pellentesque eu, porttitor vel dolor. Vestibulum ante ipsum primis in faucibus orci luctus et ultrices posuere cubilia Curae; Duis mollis semper imperdiet. In sit amet eleifend ex, quis lacinia sem. Nulla efficitur, tellus vitae elementum viverra, ligula purus interdum tellus, sit amet malesuada dolor libero condimentum ante. Phasellus suscipit condimentum tortor, sit amet feugiat enim facilisis et. Nullam tellus tellus, elementum viverra pellentesque eget, accumsan ut nisl. Aenean euismod quam velit, at aliquet leo aliquam eget.

Cras augue diam, condimentum in nisl eu, vestibulum tristique dui. Integer maximus congue ante in lacinia. Donec id purus eget felis blandit varius sit amet eget orci. Proin ac aliquet lorem, a dignissim mi. Donec suscipit porttitor erat. Praesent elementum lacinia lacus. Ut scelerisque metus ultrices mi semper efficitur. Mauris metus est, maximus id scelerisque ut, eleifend a sapien. Vestibulum ante enim, dignissim nec finibus id, maximus non leo. Quisque at tristique mi. In nisi ante, aliquet a erat ut, maximus vulputate elit. Aenean at lacus rhoncus turpis suscipit efficitur ut nec erat.

Nulla posuere magna sed ligula faucibus, at tincidunt sapien finibus. Cras maximus neque sit amet faucibus sollicitudin. Vestibulum bibendum eleifend tellus, eget tincidunt turpis maximus quis. Cras sagittis sem mi, eu vulputate lacus molestie vel. Lorem ipsum dolor sit amet, consectetur adipiscing elit. Duis aliquet a ipsum sit amet pretium. Etiam euismod dapibus enim. Morbi sed purus ut eros tristique egestas non faucibus urna. Etiam eu tellus non nulla pretium sagittis vel sed nunc. Donec et massa arcu. Vestibulum neque dui, dapibus vel elit in, scelerisque commodo turpis.

Integer turpis libero, venenatis nec dapibus quis, suscipit vel ligula. Duis vestibulum odio sem, convallis dictum lacus tempus et. Vestibulum ante ipsum primis in faucibus orci luctus et ultrices posuere cubilia Curae; Sed sollicitudin rutrum metus eget aliquet. Nam ac leo placerat, mattis nibh nec, cursus mi. Suspendisse vitae nibh tempor, venenatis erat at, hendrerit orci. Maecenas imperdiet dictum tempor. Nunc non vestibulum purus. Curabitur et ornare velit. Vestibulum non pretium neque, vel semper nisl.

 

[Robert]

1. Change your infotainment adaptation channel ENG122227-ENG117606-Car_Function_Adaptations_Gen2-menu_display_hybrid to activated - CHECK.
2. Check if you have new entry in the main menu called "HYBRID". - CHECK, Yes I have.
3. If yes, click it and enter your new menu entry(as our vehicles are not hybrids there is nothing really useful) - CHECK.
4. While you are still in that menu change the same adaptation channel ENG122227-ENG117606-Car_Function_Adaptations_Gen2-menu_display_hybrid to not activated - CHECK.

Now you should see something like below - Yes but no, actually no chance, still Hybrid thing - Power flow.​

5. Press on the screen bottom RHS car/gear icon and enter configuration menu(just for the purpose of entering that sub menu, you will adjust things later on) - CHECK.
6. Exit configuration by pressing top RHS twisted arrow icon once. - CHECK.
7. Click bottom LHS Selection icon and see what shows up there. - CHECK, selection box is empty (not even hidden items in there). Interestingly the Refuel range (with correct value) appeared, so there definitely is some intercommunication onboard.
View attachment 58349
No progress from here.

8. Do whatever you like, check everything, enter/access/modify/adjust
All regular things seem to work just fine. However, the unit won't turn off. Needs "long press reset". All "changes" are gone - as expected.

Now, can you also change
ENG122227-ENG117566-Car_Function_Adaptations_Gen2-menu_display_compass to activated
and repeat the whole process and please report?

 

[Adams]

Now, can you also change
ENG122227-ENG117566-Car_Function_Adaptations_Gen2-menu_display_compass to activated
and repeat the whole process and please report?

Mine is already active, will try the other settings shortly and report back

 

[Skyliner33]

Now, can you also change
ENG122227-ENG117566-Car_Function_Adaptations_Gen2-menu_display_compass to activated
and repeat the whole process and please report?

Quick question, how do you change the infotainment adaptation channel?

 

[Deaky]

Quick question, how do you change the infotainment adaptation channel?

With VCDS

 

[mmi]

Now, can you also change
ENG122227-ENG117566-Car_Function_Adaptations_Gen2-menu_display_compass to activated
and repeat the whole process and please report?

I see potential there... meanwhile, attached my adaptation map...
IDE02122-Developer mode activated, otherwise as from factory...

 

[Robert]

Mine is already active, will try the other settings shortly and report back

Yes, you have OFFROAD already active so you don't need to reactivate it.
I purposely didn't mention that adaptation channel to see if this would allow people to access this menu with OFFROAD mode not activated.

 

[Robert]

I would have had a go at this but this is what the instructions look like to me:

Nullam ac fermentum magna. Maecenas vitae auctor ligula. Aenean tristique eros nisi, non suscipit quam rhoncus vel. Cras in efficitur augue. Fusce vel mauris et justo convallis rhoncus eget vehicula sem. Duis nunc purus, condimentum id neque hendrerit, laoreet dignissim sapien. Curabitur eget mattis enim, et congue neque. Fusce tellus justo, condimentum at pellentesque eu, porttitor vel dolor. Vestibulum ante ipsum primis in faucibus orci luctus et ultrices posuere cubilia Curae; Duis mollis semper imperdiet. In sit amet eleifend ex, quis lacinia sem. Nulla efficitur, tellus vitae elementum viverra, ligula purus interdum tellus, sit amet malesuada dolor libero condimentum ante. Phasellus suscipit condimentum tortor, sit amet feugiat enim facilisis et. Nullam tellus tellus, elementum viverra pellentesque eget, accumsan ut nisl. Aenean euismod quam velit, at aliquet leo aliquam eget.

Cras augue diam, condimentum in nisl eu, vestibulum tristique dui. Integer maximus congue ante in lacinia. Donec id purus eget felis blandit varius sit amet eget orci. Proin ac aliquet lorem, a dignissim mi. Donec suscipit porttitor erat. Praesent elementum lacinia lacus. Ut scelerisque metus ultrices mi semper efficitur. Mauris metus est, maximus id scelerisque ut, eleifend a sapien. Vestibulum ante enim, dignissim nec finibus id, maximus non leo. Quisque at tristique mi. In nisi ante, aliquet a erat ut, maximus vulputate elit. Aenean at lacus rhoncus turpis suscipit efficitur ut nec erat.

Nulla posuere magna sed ligula faucibus, at tincidunt sapien finibus. Cras maximus neque sit amet faucibus sollicitudin. Vestibulum bibendum eleifend tellus, eget tincidunt turpis maximus quis. Cras sagittis sem mi, eu vulputate lacus molestie vel. Lorem ipsum dolor sit amet, consectetur adipiscing elit. Duis aliquet a ipsum sit amet pretium. Etiam euismod dapibus enim. Morbi sed purus ut eros tristique egestas non faucibus urna. Etiam eu tellus non nulla pretium sagittis vel sed nunc. Donec et massa arcu. Vestibulum neque dui, dapibus vel elit in, scelerisque commodo turpis.

Integer turpis libero, venenatis nec dapibus quis, suscipit vel ligula. Duis vestibulum odio sem, convallis dictum lacus tempus et. Vestibulum ante ipsum primis in faucibus orci luctus et ultrices posuere cubilia Curae; Sed sollicitudin rutrum metus eget aliquet. Nam ac leo placerat, mattis nibh nec, cursus mi. Suspendisse vitae nibh tempor, venenatis erat at, hendrerit orci. Maecenas imperdiet dictum tempor. Nunc non vestibulum purus. Curabitur et ornare velit. Vestibulum non pretium neque, vel semper nisl.

Latin was always my favourite school subject