My local VW Vindis happy to lower with DCC

[chriscroft]

Measured from the centre of the wheel. I have non-standard tyre sizes
Rear: 440mm Loading is light; it will compress if loaded, empty vehicle
Front: 425mm Loading is light

If you look on VW Golf forums, lots of people fit shorter springs with DCC, with no problems; I guess there is a limit, but 30mm-40mm drop (I am guessing) would be OK, (but don't hold me to that.)
VWVortex.com - Lowering Springs VS DCC

My local VW Vindis happy to lower with DCC
see also page 3 of this thread

 

[nacetu]

Hi, I measure now from center and I have the same hight from center wheel to wheel arch with DCC 440 mm front and back nothing in the car just all 7 seats...

 

[chriscroft]

So it would seem that you have dynamic suspension 20mm lower than standard - factory fitt,
but I would have thought your front would have been a little lower neared the 425mm??
Have you got a 204bitdi?

 

[nacetu]

No my is 150psi with DSG...30mm drop I think would fit perfectly...

 

[chriscroft]

No my is 150psi with DSG...30mm drop I think would fit perfectly...

If you want to drop it a further 30mm; and you already have 20mm dropped dynamic suspension; you will need a 50mm dropped spring.
I guess your 150psi is it a TSI is a lighter lump than a BiTDI that I have, but your front does seem a little high to me, if you have the factory 20mm drop already.?????

 

[nacetu]

435-440mm front 435-440 back I checked many times I think this is not 20mm lower I will measure it from a friend who has same but no active suspention my hight of the T6 in papers is 1950mm

 

[chriscroft]

435-440mm front 435-440 back I checked many times I think this is not 20mm lower I will measure it from a friend who has same but no active suspention my hight of the T6 in papers is 1950mm

On SWB 1970mm high = Standard Springs
1950mm high = 20mm lowered Dynamic suspension

What engine have you got? petrol TSI or TDI

 

[nacetu]

TDI 150hp with DSG