Paintwork Surface area

[spooks007]

Happy New year and all that Jazz.

Anyone have any ides what the surface area of the paintwork on a T6.1 kombi is please?

Reason I ask I'm looking to ceramic coat the van in a few weeks and pending brand it will determine 1 or 2 bottles of ceramic coating. (Could get expensive!!)

 

[drinfinity]

Consider a cuboid van 2x2x5m. That gives 38m2, and then you can take off the area of the glass.

 

[JOG]

Happy New year and all that Jazz.

Anyone have any ides what the surface area of the paintwork on a T6.1 kombi is please?

Reason I ask I'm looking to ceramic coat the van in a few weeks and pending brand it will determine 1 or 2 bottles of ceramic coating. (Could get expensive!!)

Prepping the van before ceramic coating is the expensive bit!!!

 

[phazer]

A 50ml bottle is more than enough to do the roof and all panels outside. I used a wheel specific and something else on the glass so if you want to use the same sealant on everything you'll need 80-100ml I'd say - you certainly don't want to run out half way through a panel!

 

[spooks007]

A 50ml bottle is more than enough to do the roof and all panels outside. I used a wheel specific and something else on the glass so if you want to use the same sealant on everything you'll need 80-100ml I'd say - you certainly don't want to run out half way through a panel!

Prob is most of the bottles are 30ml grrr which one did you use to get a 50ml.bottle

Prepping the van before ceramic coating is the expensive bit!!!

Ah don't mind that been correcting paint for a few years now so got a good collection of compounds and pads. Time and space is the key

 

[phazer]

Prob is most of the bottles are 30ml grrr which one did you use to get a 50ml.bottle


Ah don't mind that been correcting paint for a few years now so got a good collection of compounds and pads. Time and space is the key

Gyeon Mohs Evo is my go to, used it a few times now. Have a look at my post in the review section for CRS, I posted a photo in there, even though it's soaked in rain it's proper glossy I did an (almost) full correction on it before coating.