Reimo Variotech Seat Belts

[Paradiddle]

Hi, has anyone come up with a clever solution for stopping the seat belt latches falling under the seats for the Reimo V333 seats?

I know you can simply keep the seat belts bucled when not in use and this will work however the kids never remember to do this everytime they get out of the car and then have to rumage around under the seat to find them everytime they get back into the van.

 

[Ali-G]

As you say, I just used to keep them plugged in but you could get some clips from Amazon.

Amazon.co.uk

 

[drinfinity]

Mine only drop under if you lift the seat pad. Have you got the seat pad fully shoved in? A little lift up at the front and push it back and the seatbelt sockets don’t drop down.

 

[Paradiddle]

Mine only drop under if you lift the seat pad. Have you got the seat pad fully shoved in? A little lift up at the front and push it back and the seatbelt sockets don’t drop down.

I don’t have have any movement on the seat pad so there is a small gap that the belts always fall through

 

[drinfinity]

I don’t have have any movement on the seat pad so there is a small gap that the belts always fall through

Can you show some photos of the front corners of the seat pad, and the gap? Mine is quite tight and they don’t fall through unless I open it.

 

[Salty Spuds]

Can you show some photos of the front corners of the seat pad, and the gap? Mine is quite tight and they don’t fall through unless I open it.

Same here, the only time that the buckles fall through is when we put the bed out.

 

[Paradiddle]

 

[drinfinity]

My seatpad is snug against the back. You would have to push hard to get the sockets down without opening it.

There are various adjustments - maybe the stop on the cam at the front of the seat? Never tried adjusting, though it might help track down my squeak.