Shuttle info required please.

Scott6

Member
Hi guys in new to the forum and also transporters.
I got myself a t6 shuttle with 20k miles last week and I'm looking to get some alloys and get it lowered on springs only for now, I'm hoping with it being low miles and on a 66 plate the springs will be ok.

I've got a few questions if anybody could help.
On the logbook it was stated as a t30 and when insuring it. But I've read online that there is only a t32 shuttle?

So when looking for springs and parts for the t6. What am I looking for? Most sites like vanstyle etc list parts for transporters or caravelle?

Also regarding wheels, this might be a daft question but will wheels from a t5/t6 transporter fit on the shuttle?
Do I need springs for a t30 or t32?

I've included a picture of the data plate from the engine for reference and under the dash.

Any info I'd appreciate. Thanks

20200620_202716.jpg

20200617_202837.jpg
 
Re wheels you need to check load rating and obv stud pattern. T32 have bigger brakes which can cause some issues with clearance. T30 shouldn't be a problem
 
Re wheels you need to check load rating and obv stud pattern. T32 have bigger brakes which can cause some issues with clearance. T30 shouldn't be a problem

lol, t32 does not have bigger brakes as standard.
 
Well I've got my alloys sorted, picked up a set of sportline alloys with Load rated tyres from a t6forum member earlier this evening.
Thanks for the input guys.
 
Back
Top