Stuck Second Row Seat Belt (T6 Crewvan Rockton)

[Surfacerocket]

Hi guys, I just picked up my 2019 T6 here in Australia. It’s got a 3-seat foldable bench seat. I folded it forward and then couldn’t get it back up because the seat belt jammed. I had to take the covers up to access the belt winder and I played around a bit but it’s stuck, maybe the inertia reel. There is a housing around the receiver for the neighbouring belt and the fixation point for the faulty belt. I can’t remove the housing without breaking the clips. I’m happy to break them if I need to but I can’t find a replacement housing anywhere on the internet…any ideas?

 

[Phil1878]

Did you get a fix? Same happened to mine. Managed to wiggle it down the back if the seat mm at a time but it snaps tight every time you pull on it like it's being yanked on

 

[Greybeard]

You may find something of use within these?

Search results for query: Rear seat belt stuck

www.t6forum.com

 

[Phil1878]

You may find something of use within these?

Search results for query: Rear seat belt stuck

www.t6forum.com

Very helpful cheers. Job for tomorrow maybe, just opened a beer

 

[Phil1878]

Very helpful cheers. Job for tomorrow maybe, just opened a beer

Sorted.....for now. Managed to wiggle enough slack for the seat to lift up then it was free. Very strange

 

[Pewt]

I always wrap the seatbelt around the headrest before folding the seat flat.

 

[Phil1878]

I always wrap the seatbelt around the headrest before folding the seat flat.

Noted

 

[Kev.O]

I have one of the clips used to seal bags, in black that I use when I want to drop the seat, just pull the seat belt out about 6 inches to enable the wiggling should it lock up. When not in use the clip it to the bottom of the seat belt behind the seat where it clips to the C pillar.