T6.1 High beam Assist coding

[Widget2k13]

Hi , I’ve fitted high beam assist mirror with camera in to my vw t6.1 and wondered if anyone knew the coding procedure with vcds please , I tried following the t6 version but the options I need are not there , central electronics , adaptions channel 53 and 54.
I know someone got it working on here but they don’t say how they coded it etc
Thank you

 

[mmi]

Please post full unedited VCDS Auto-Scan and adaptation map of the BCM (central electonics) - before any modifications were made.
Please post current VCDS Auto-Scan.

 

[Widget2k13]

Please post full unedited VCDS Auto-Scan and adaptation map of the BCM (central electonics) - before any modifications were made.
Please post current VCDS Auto-Scan.

how would i do that please, im just new to this i only want my hba switched on nothing else

 

[DubHaus]

Check the coding in my post >>Here<<

 

[Widget2k13]

Check the coding in my post >>Here<<

it doesnt load says site cannot be reached

 

[DubHaus]

as @mmi requested, post your scan and adaptions before you start changing anything!

 

[Widget2k13]

as @mmi requested, post your scan and adaptions before you start changing anything!

i couldnt change anything it asked for a code everytime i clicked on something

 

[DubHaus]

Multiple Retrofits, Side Assist, Trailer Assist and Park Assist - VCDS help required please

I don’t have trailer assist Ok - noticed a few lines saying "Trailer assist active" in the 5F. A couple of questions re the ABS coding The van is SWB big front brakes ACC or normal CC ???

www.t6forum.com

 

[mmi]

how would i do that please, im just new to this i only want my hba switched on nothing else

The Auto-Scan and adaptation map show how the van is configured - as often the coding depends what else is onboard - e.g. headlight type, dashboard. All the electrics are controlled via the BCM adaptations also the HBA.

The sccan and the map will also serve as a backup in case coding attempt messes something up.

---

VCDS​

Just click Start (let VCDS Auto-Detect the van) - save the scan and attach here.

---

VCDS > Applications > Controller Channel Map >



Tick/fill boxes as above and click Go.

VCDS flashes screens for a moment (when finished hit "Done, Go Back") and there should be file adpmap-09... in folder C:\Ross-Tech\VCDS\Logs\....