Not a bad idea, I’ll try that , cheers
T6 rear lights with double reverse
- Thread starter monty999
- Start date
I know this has been discussed before, but I can't seem to find anywhere if it's possible to make your own wire to get both reverse and fogs working with the VW T6 LED Rear Lights Sequential BARN DOORS - RED SMOKE (T6.1 STYLE)15-19 from THQ.
I know travelinlite do it for the tailgate version when you buy there lights, but as everywhere not for barndoor version
I know travelinlite do it for the tailgate version when you buy there lights, but as everywhere not for barndoor version
I got these from THQ and both reverse lights work on my 2016 van.
transporterhq.co.uk
VW Transporter T6 - Rear Lights - Sequential Indicator - LED - RHD - Barn Door - Red (T6.1 Style)
These VW T6 LED lights are red tinted and are designed to have the same style as the lights that would be found on a Transporter T6.1.
transporterhq.co.uk
My t6 is only wired with reverse and fogs only on one sideI got these from THQ and both reverse lights work on my 2016 van.
VW Transporter T6 - Rear Lights - Sequential Indicator - LED - RHD - Barn Door - Red (T6.1 Style)
These VW T6 LED lights are red tinted and are designed to have the same style as the lights that would be found on a Transporter T6.1.
I did this, has made a massive difference.
What I don't know is which side my fog light is on! if that is on the other side you could try using that as an alternative to the hazards.
I spent more money on a reversing camera, which picks up the light from the one LED reversing light very well across the whole of the rear.
well after some testing, as i was going to attempt to wire from one side to the other, i found out mine is in fact fitted with dual reverse/fog, oddly it was both bulbs gone in one side
Did anyone tried fitting under the bumper small lighbars like the one below on the photo? If yes, how did you do the wiring? I am considering fitting 2 of those lightbars in slight angle outwards but not sure with wiring. I have a tow bar, so this is one option and second is to connect straight to original reverse light. What is your opinion?
I have installed a single 15" lightbar under my rear bumper. Wired in as suggested above.
I am considering either OSRAM or HELLA. Lazer are quite good but expensive for reverse light
Sweet. Have you got any photos how it look like and where did you fit it to?
Similar threads
