Un plugged wire

[FREDO]

I took my mirrors off my 2022 T6.1 to get them painted and when I re fitted them I can not find were this wire plugs into. I know its an earth wire and it comes from the R/H mirror into the door but I can not remember if it plugged into anything.
If anyone can help please

 

[Dellmassive]

Looks.like a coax from an antenna in the mirror?

 

[FREDO]

Looks.like a coax from an antenna in the mirror?

It goes to earth

 

[Dellmassive]

its a coax for VX67 Right Exterior Mirror, - thats what it looks like to me.

more info . . .

T6.1 - Radio/Sat Nav Wiring Diagram

Infotainment system/satellite navigation system wiring diagram including associated speakers/aerials etc VIP Membership is required to download this document

www.t6forum.com

VIP Membership

VIP Membership Information

www.t6forum.com

 

[Dellmassive]

can you post another pic showing the inside of the connector?

 

[Dav-Tec]

Definately a coax. It's just taped to an earth wire.

 

[Dellmassive]

FWIW . . .

this is one of the main Ground points.


for the coax screen on the drivers door anyway.

 

[CJW]

Replaced my antenna recently. The black plug (which I assume you’re referring to) was one of the two antennas - plugs into this silver metal end that should have a matching black/purple socket. How lucky that I took a reference photo before pulling it all apart.

 

[FREDO]

Maybe because it is an Australian model and we don't have DAB or SOS it is not
connected.
I have looked everywhere and no other connectors for it to plug into.
Thanks

 

[CJW]

Makes sense. FWIW for future readers of the site with a similar issue, mine was bound up in the foam anti-rattle treatment, which I had to tear.

 

[Neil 81]

Can anyone identify the three coax connectors here please. Behind the driver's door card (RHD). There are no aerials in my mirrors and I have the SOS error and no radio reception so I'm trying to find which to buy. (Think I have the one for the LH mirror and the GPS black cuboid block from the right but there are two other connections on the right as you can see from the image.
Any help appreciated.