Do ypu mean you need to connect the tow bar loom to the BCM, or has this been done?
Whit it is you will need someone with vcds to do the coding for the towbar.
Whit it is you will need someone with vcds to do the coding for the towbar.
VCDS in Surrey
- Thread starter Tony Smith
- Start date
Hi, I’ve done all the wiring. I need someone to plug in and change whatever needs to be changed to let the system know that there is a tow bar attached. I beliveve there are some flags or something that needs to be altered yes?
The lights will work as it is, but you need VCDS to tell the van it has a tow bar fitted for all the other functions to work. It's a simple box tick. The van will then know when a trailer is attached to alter the ESP, turn off the rear sensors, not turn the vans fog light on, monitor the other trailer lights and sound the alarm if the trailer is unplugged when the van is locked
Right thanks Dubber.
I do have a slight issue with the lights at the moment in that the rear sensors are not now working properly since I changed the wiring. I am hoping that the VCDS change might sort this out?
I do have a slight issue with the lights at the moment in that the rear sensors are not now working properly since I changed the wiring. I am hoping that the VCDS change might sort this out?
Setting off the alarm when unplugging the trailer freaked me out the other night as I hadn’t realised it works like that! Handy feature though.
Ok, np, thanks Deaky.
We can do this
Bit of a drive for me down to Bognor. How much?
50min drive to have it fixed.. too far! You should be more worried about what else you will buy when you are there...
Lol, there is that
Going to need some help with coding retrofit LED headlights.
I think the map was removed due to data protection. Perhaps add you location to the title?
Hi guys,
Having just picked up my van I have been reading a lot on here and have realised there's a couple things I would like to have coded on it.
I'd like the comfort close windows and the folding mirrors to work on the fob.
Wondered if any of you kind clever people live near me (near Leatherhead) and wouldn't mind helping me out with this?
Having just picked up my van I have been reading a lot on here and have realised there's a couple things I would like to have coded on it.
I'd like the comfort close windows and the folding mirrors to work on the fob.
Wondered if any of you kind clever people live near me (near Leatherhead) and wouldn't mind helping me out with this?
What's the model year, its possibly MY17 if it's registered in 2016. If this is the case then folding mirrors on lock can't be coded. You'd have to use an aftermarket module such as this T6 Power Folding Mirror Upgrade Module & Switch Kit
That's good to know, I'm in Fetcham too
Similar threads
