No but I'm in on the 28th!!You having anything done on the 16th from the nice bloke at Cannock?
No but I'm in on the 28th!!You having anything done on the 16th from the nice bloke at Cannock?
Which operation are you having? Air? Air could be very useful on Rural Relapsings uphill field!No but I'm in on the 28th!!
How exciting, you will be pleased I'm sure. That Steve does wonderful things!I wish!! No Definition I believe. Can't justify cost of air!
I hope you’ve been wearing a decent face mask with all that sawdust around?About 5 hours of routing my walnut (not a euphemism!). AKA making a load of sawdust!!
Main shape done and I've made a start on the sink cut out.
Just the rest of the sink cut out, tap hole, corners, LED strip channels, and edges to do...
Yes exactly, the channel. It gets wet but doesn't fill so does seem like there is some drainage working as it should. Sounds like I need to look in to this a bit. thanksWhen you say 'bottom channel' do you mean the channel the sliding part slides in? There's a drain hole at each end of this which should (provided it's not become detached) drain to the outside.
FYI you can give the seals a helping band by inserting 4mm foam cord into them, I've done that on mine and they're fully watertight (maybe a few drops on the vertical front section) Vs before I had puddles in the sliding door step.
Sounds like your drains are working as they should be then, you could look at improving the seals if you wanted to stop the water getting into the channel in the first place.Yes exactly, the channel. It gets wet but doesn't fill so does seem like there is some drainage working as it should. Sounds like I need to look in to this a bit. thanks
can you tell me if there better and what ones you got please?Changed the dipped beam bulbs for some better ones in my H4s, which should hopefully make them marginally less crap.
On the positive side it took me about 5 minutes, I knew there must be one positive to having small hands.
Haven't had chance to check yet but see this post.can you tell me if there better and what ones you got please?
@RedUn Do you just need to plug this in as you've done in the pic, or do you need to set it up somehow? Mine has arrived today but there were no instructions with it.