Search results for query: centre bore

...at the painters. Result is the paint is thicker than it should be, but at least they shouldn’t rust quickly… The issue is with the centre bore. Tight. You can see where I’m going with this! I used wheel bolts to pull wheel onto centre bore thinking it would push out excessive paint. It did...

Cheers lads, I couldn't find or see the centre bore size anywhere.

...have also been ceramic coated for easy cleaning. Wheel Specifications: 9J ET42 Diameter : 20 Inch Bolt Pattern : 5×120 Fitment Only Centre Bore: 65.1 Colour : SATIN ANTHRACITE Style : Multispoke Load Rating 1050kg (per wheel) Fitted with Rotalla Setula S Race RU01 tyres all round...

...up this as a likely contender.. Torque Wheels 142 Finish – Gloss Black Wheel Specification: PCD – 5×120 Width – 8.5J Offset – 40 Centre Bore – 65.1 https://torquewheels.uk/alloy-wheels/load-rated-gloss-black-x4-20-v142-alloys-vw-t6-1-t6-t5-transporter-amarok/ Perhaps the OP can clarify

We’ve went the other way, booked all the sites and figuring out what we are doing between them. Starting in Aviemore and ending in Glencoe though. Our 6yo will be bored stiff if she doesn’t get Landmark Park and the Highland Wildlife Centre at the start.

...with the secs below. My question is I don't want the wheels to poke out beyond the wheel arch's. Can anyone advise on the specs below. Cheers Size: 20 Inch Width: 8.5J & 10J Offset (ET): +35/+40 Respectively PCD: 5x120 Centre Bore: 72.6mm (Spigots Included) Max Load (per wheel): 885kg/1950lbs

Hi Thanks for that, I've got lots of clogging DPF issues. I really need to get in touch with someone who takes these engines apart and fixes them. VW Van Centre are talking about whole engine replacement, 13k +. I'm sure there must be a better way.

...bottom of the threaded holes and let them rattle around. The spigot rings centre the wheels on the hubs when the hub is smaller than the centre bore of the wheel, this should take most of the weight of the vehicle, the bolts just hold the wheel onto the hub once its supported by the spigot...

Thanks for your message Dave. I spoke to Rimstyle and they are supplied with spigot rings so all good. Thanks for your advice

...120 72.6CB Load Rated to 850kg Velare VLR08 Size: 20 Inch Width: 8.5J & 10J Offset ET: +35mm & +38mm Concave: 40mm & 60mm PCD: 5x120 Centre Bore: 72.6mm (72.6 - 65.1 spigots included) Max Load (per wheel): 875Kg These look pretty similar to me - anyone got experience of either...

Straight swap, didnt use spigot rings on mine

Lowering the price has created a lot of interest... Please check the dimensions fit your vehicle, as I do not want them returned if they don't fit... Especially centre bore. These wheels = 65.1mm, occasionally some vans have bigger hubs. Load rating is 930kg per wheel.

20” 8.5J & 10J Offset: +35mm & +38mm Concave: 40mm & 60mm PCD: 120 Centre Bore: 72.6mm (72.6-65.1 spigots attached) Max Load (per wheel): 875kg Come with 275/35/20 and 245/40/20 budget tyres that have a few miles left Also comes with wheels nuts including lockers A bit of kerbing damage and...

Hi I’ve just got these new wheels Size: 20 Inch Width: 8.5J & 10J Offset (ET): +35/+40 Respectively PCD: 5x120 Centre Bore: 72.6mm (Spigots Included) Max Load (per wheel): 885kg/1950lbs And I really need to know what tyres to put on them it’s a t28 with standard suspension at the mo and help...

Hi, what's the load rating on the wheels? I can see the tyres are good for a T32 but are the wheels? Do they fit with standard bolts/locking bolts? Do you know the centre bore? Just wondering if they'd need different bolts and/or spigot rings.

I had to do the same with the first set I bought I couldn't get them to fit properly, a little bit of emery cloth to the centers and a little smidge of copper slip soon sorted it and the subsequent 3other sets:whistle: To get them off if you thrash the side wall on the face off the wheel (N S E...

I’m hoping someone can help with an issue I’m having with VW Commercial UK. I’ve had a look but can’t find any posts covering this so apologies if I’ve missed something. My 2022 Transporter 6.1 is still under warranty with about 10,000 miles driven. The Adblue warning message to top came on as...

...find any - I’d thoroughly recommend the guys over at Watfields / PDC parts in Barnsley. Wheel Spacers | PCD Spacers | PCD Adapters | Centre Bore… | PCD Parts I visited them in person and they were super helpful. Bought a set of 20mm and 15mm and only used the 20mm so returned the 15s without...

You shouldn’t get any poke from the wheels, but it can also depend on the tyre size and how low you are. I can supply the wheels and also with tyres if you haven’t already bought elsewhere.

The centre bore on these wheels is too large for a T6 / T6.1, they'd fit but you'd need spigot rings, the centre bore you need on your wheels is 65.1mm. Have a read of some of the other threads on centre bore and spigot rings for an explanation...