Search results for query: centre bore

Here they are - Navis Twin-5 Wheel Specifications: Diameter : 20 Inch Bolt Pattern : 5×120 Fitment Only Width : 9J Offset : ET42 Centre Bore: 65.1 Colour : Gloss silver Style : Multispoke Load Rating 1050kg per wheel

Thanks, but I don't have a welder or lathe. I've had a closer look tonight and couldn't see any remnant of drill bit left in so didn't grind it flat as I'd originally planned. I'll have one more go at drilling when the new bits arrive and after that I'll just have to take it somewhere.

Tiguan wheels are 5x112 so won’t fit a Transporter, which is 5x120. The Transporter centre-bore is 65.1 mm - bigger than the Tiguan. Make sure whichever wheels you find are load-rated to match your axle weights (ie: T28 has an axle load of 1600kg, so the wheel has to be rated to carry 800kg or...

B I’ve had similar experiences with titanium drill bits. It’s best to dull the cutting edge on a brand new cobalt drill when drilling soft material to avoid it ‘biting’, jamming and snapping. This can be done by using it on a relatively hard material for a short time. If there is a piece of...

...if that makes a difference when compared to a T28. Is the stock suspension different depending on the van payload? Would be nice to hear from anyone who has bought these wheels for a T28 and what they would advise Thanks Size: 20x8.5J Offset (ET): 45 Centre Bore: 65.1mm (Direct Fit) PCD: 5x120

...was going to fit them and run them as my daily's but not got round to fitting any tyres since the refurb. Size is as follows: 8.5x20 PCD 5x120 Centre Bore 65.1 These retail at around £1099, I'm looking for £900 I'll thought I'd see if there is any interest on here, before going on social...

...attempt....just ask @Tourershine as even with a mallet he couldn't get them to budge. I ended up hitting them with a larger hammer, filing off the powder coat on the centre bore and copper slipping to make life easier. Devonports will fit all T6s, ET56 is fine and have 65.1 centre bore fitment

...chrome surround, on the right) fits my Sportline wheels whereas the domed cap doesn’t, and feels like the tabs will snap if forced: Domed: Flat: The centre bore on the wheels measures 53.7mm. They’re the gloss black T6 wheels with a silver rim: Is there a difference in Sportline cap...

quick question and will save me removing one of my devonport wheels if possible what size is the hub centre hole on the t6 ? new replacement wheels front hub is 72.54 and rear are 74.10 just need to know what the oem hub size is to order spigot rings. have had a look online and the search...

...out a load rating in those images, but you need to have a minimum load rating of 805kgs for the wheels. Bolt PCD needs to be 5 x 120. Centre bore needs to be a minimum of 65.1mm, but can be more if you use spigot rings. You need 101 load rated tyres as a minimum, and on an 8.5" wide rim, your...

...without spacers i would think; I run (as do many) ET45 on 9J so these would be 3mm further in, and you're running a slightly narrower tyre too. You'll need spigot rings to adapt the T6 hub to the centre bore of the x5 wheel Seen plenty of T5's on tiger claws, but don't think I've seen any T6's

Number 2. Call central VW van centre. They can tell you all the service history that was done at a VW garage. 0800 333 66 66 I did this when sleuthing my service history on my van.

Many thanks for the replies, yes the wheel was a nightmare to get off, though the tyre fitter did get it off with the rubber mallet, I thought they fitted all T6's.

Are they the same centre bore/pcd ??

...issue I had with banded steels after they where fitted was I couldn't get them back off!!! they were such a tight fit that only a large hammer could get them off. I did as @Tourershine mentioned, I checked the torque on the nuts every few days and I filed out the centre bore once I got them off.

...to be designed for the new range rover. Does anyone know whether they will fit my new T30. Everything looks OK but I am unsure of the centre bore fitment. In fact I am unsure about this in general as I have seen other wheels designed for both range rovers and Bentley's quoted OK for VW...

Lovely alloys , i love the momo's , they'd look lovely on my white T6, unfortunately money is tight at the moment. I am curious though as to what is the issue with the diamond cut alloys ? Thanks

Different centre bore and bolts, however, you can get a conversion kit with plastic spigot rings and stud/nuts. Had Range Rover sport alloys on the T5 with the fitting kit. Merseyspeed used to sell them.

I have my Sniper TV and DVD mounted in that location also. Gives another entertainment option, should the weather be bad. I am planning on hooking up my Anker or Bose Soundlink bluetooth speaker to the TV, and the speaker to the centre dashboard location.

...wheels I'm running are the concept versions and they have a couple of very minor tweaks to make to the Schmoov wheel, but that's only the centre bore being a little snug and the fact VW caps don't fit perfectly on these wheels yet, but these wheels do have the option of an old school domed...