So I have got my xenon headlights all set up with the correct bulbs in every lamp. I have tried a quick test using the Kufatec xenon to halogen wiring loom adaptors.
I have got everything working. The xenon works in both low beam and the gate lifts to give me high beam. High beam second lamp...
I have installed the following bulbs in my DRL's, I tried different bulbs from Tewnty20 but due to their form factor I couldn't get them to fit in the light housing and dind't fancy taking the headlight unit off the van to install...
...Bulbs (Pair) H7 lights will need 2 pairs of these bulbs.
582 7440 Twenty20 Elegance Canbus LED's 12V W21W LED DRL's. The Twenty20 Led DRLbulbs will need the following Canbus kit to stop a Bulb warning on your dash.
VW T6 Transporter LED Fog Light Upgrade | eBay
You might be able to source a...
...and be the right colour etc though. I’ve linked the MOT doc below but I’ve not read in great detail, just a scan read, so happy to be corrected.
MOT requirements
As the H7 DRLbulb is hidden behind a frosted lens it would have to be removed by someone to check. Highly unlikely to be a problem!
A light has come on my dash and it's the day driving light I think as one has gone out. I have a t6 and the light has a blue tinge to it. Is this a standard bulb? I've read about its possibly a big job to change for some reason? Strange to just change a bulb.
Hi, Im having a similar issue... i replaced the DRL with LED's.. they seemed to work fine for a few hours... now I've a yellow warning light on the dash telling me a bulb is out.
I've tried the origional bulb in and the same issue... Im not very tech Savvy.. is there anyone near me who has the...
Ok this may be a daft question but how to the standard t6.1 headlights work, Tonight I’ve changed my bulbs h7 and h15 drlbulb, I’ve just been out for a drive but when I put my high beam on it kills the main beam?? It just leaves the drl on , I've also noticed that the drl stay on with the main...
New headlights today … happy with the look and the brightness !
Travelin-lite
T6 LED DRL Headlights V3 Black Edition (Osram Blue intense bulbs H7 & H1)
I went with Osram Cool Blue Intense for the dipped and main and Twenty20 for the DRL. The LEDs are canbus friendly but if your battery is low will give a bulb out warning. This clears on the next start when the battery is back to normal.
Osram Cool Blue Intense H7
Twenty20 DRLbulbs
I’ve managed to get hold of some H7’s. Is there anyone in Staffordshire around the Rugeley area who has access to a VCDS that could help me with the coding to keep the dipped on with main and possibly turn off the DRL when indicating?
Thanks in advance.
I bought some Twenty20 Cree LED DRL's for my H4's about a year ago and the bulb warning light has just come on (despite the bulb being fine). A quick clear of the fault in VCDS and an engine recycle has resolved this but just wanted to see if anyone else has had this issue with these DRL's? They...
The DRL on our 2012 T5.1 has stopped working. The bulb is OK, but I have no idea where the fuse is to check if it has blown. Could someone kindly point me in the right direction. Thanks in advance
Sean replacing the DRLbulb on the H7 headlight unit without removing the whole headlight unit is pretty much impossible. That’s why VW are telling you it’s a wiring issue…. removal of the bumper/grill to then remove the headlight unit is inevitable.
Don’t be afraid to tackle this job yourself...
...out the bulb holder for the wired version.
Sadly VW now want £27 each for the repair part!!!
So if your making the change to H7 check the DRLbulb holder and if it has the old style bayonet contacts maybe think about changing them out for the wired type while you have the headlight units out.
My DRL holder is slightly melted but works. Drops out occasionally, hence the repair kit purchase. I did the upgrade about 3 or 4 weeks ago. Hope yours stays working for you. The night breakers in dedicated reflectors make a huge difference. Programming dipped to stay on when full beam on is...
Hi,
Posted in another thread, tell me if this is naive or against forum rules please.
Looking for someone to perform the soldering fix on a DRL lamp holder.
There appears to be a thread whereby someone has bypassed/ soldered some wires to offset the issue of a dodgy lamp holder causing bulb...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.