Search results for query: *

All set up here too. Not put up awning. Cosying up, then pub for supper

Completed the packer install and also foil foamed the rest of the area cause it was spare and there... i know it's not essential to anything. Nice that the voids are filled is all. Got anchor points to drill out and loads more to do

Hi, This is my first post have been lurking the forums and digesting loads of great information. My question is would i be better off with a sargent set up or a victron type one? Mainly going to be off grid , intend to fit solar to roof and a lipo battery, opinions gratefully recieved, Thanks in...

I too connected my BLUETTI Charger 1 to the negative connector too and it drained my battery. Since connected to the headlight fixing point but still seeing slow drain on my battery while van not being used. I’ve installed a battery monitor and it charges fine while driving but lost 10% in 3...

Yes, apparently it’s because the front tyre flicks up the offending item and so it isn’t lying flat when the rear goes over it. Well they are different, so yes.

Re-positioned Fiamma rear bracket as the one fitted had broken rivets. I have moved the bracket back 17" to the rear. This will give better support to the awning ,as it has a roof fitted the only fixing was forward of the original roof fixing that is now taken up by the roof. I have drilled and...

Looks very smart. Not seen many options for a 3rd row bed. No seat belts?

Using a multimeter amps dc between vehicle battery negative and negative terminal

I could have made better use of the pitch and brought the van much further forward and put the camp shelter behind the awning. I also have a drive away Galli but not sure I really need it anymore! I prefer this setup.

No there isn't an ignition live on this, I believe it's automatic. Wired as per diagram.

How are you measuring the current drain?

Interesting point... Yeah, that could be worth a try Cool, ta. As I thought, just taking a line back from the rail below the sliding door's windows puts me in the right place.

I installed my Rust Lee swivel seat base from Transporter HQ VW Transporter T5/T6 - Rusty Lee - Swivel Seat Base - Single Great price and very heavy duty.

This is random, in my first post in this thread I mentioned being in GL10 but I can see what you mean now, my profile says Sidcup!?

Do you have an ignition live feed connected to your DCDC? If so, what is it connected to at the other end? Without the engine on the Renogy shouldn’t be taking half an amp out of the starter.

Good job, makes a big difference in stopping the rain coming in when the window goes down because of the pop top as well. I fitted one to both sides in the end. Watch out for the wee plastic end at the back though, it will fall off one day when your threading the awning strip on.

Yes read that about front vs back plus apparently statistically there are more punctures to rears One letter difference on tyres = unmatched??

I've been chasing a parasitic battery drain as after leaving van for a week the starter battery will be flat. Testing between negative battery terminal and negative lead with all doors shut ect im getting around 0.9a drain. If I disconnect the positive cable from starter battery to renogy...

Turning a T28 into a T31 just by magically transferring £276 into someone else's bank account. SV Tech, or Van Weight Engineering are two companies that deal with up-plating, and have websites that explain the ins and outs. Worth doing if you are concerned about being legal with regard to the...