ply

Just about to order some ply panels what size is best for carpet 3.6mm or 6mm

I'm struggling to attach a carpeted sheet of 3-4mm ply to the fibre glass on the interior of my pop top roof. I put Sikaflex onto the fibreglass which I had keyed and pushed the panel onto it, it has stuck in most areas but has come loose at the far 'thin' end. The fibre glass is not really...

Got 9mm battons and 12mm ply floor. What size screws are best and any type? I know its common sense but just want to be double sure. Thanks

I was going to box in my wheel arches in my day van. Intend to box in and create a handy storage area. Also rest a platform on top of new boxes to create a bed (but thats going to be further down the line). I was wondering if 9mm ply would do the job or should I go for 12mm? Cheers.

Hi Chaps i have a perfectly good 12 mm floor with wheel arch boxes and a wood effect altro floor all for £80 collect from shrewsbury or oswerstry The floor just needs a mop

new SWB 2019 Transporter, brand new freshly varnished single piece 12mm ply floor from Infinity customs ( paid £156 ) and a piece of Altro industrial slate grey contrax anti slip vinyl; still wrapped in its postal tube ( paid £108) excluding shipping . Both unused and brand new .... Expecting...

I’ve been searching and searching and cannot really find a recommendation of what paneling ply and where to get it from. Van is a SWB window van with 8 seats. I was going to buy 6mm pre cut panels off ebay to carpet and replace the wetabix OEM panels. Have read many horror stories and been...

Selling a one piece plyworx 3.6mm headliner covered in Harrison’s trim grey suede liner - 4 cut outs for spotlights and clip holes. Was going in my swb T6 kombi - but change of plan ( Mrs has now allowed me to get poptop lol ) £75. Collection or could deliver short distance - observing...

Hi guys, looking for recommendations for ply boards and the 12mm ply flooring. I've heard of people before getting dodgy fitting ply floors so just want to get a decent one. Thanks

Dont know if anyone would be interested in this?..

After adding the foil insulation, (into the gaps) I'm going to be securing the three piece 12mm flooring. I was just going to screw it into the 9mm ply I've glued in, however I've ready that many people glue and screw. Gluing seams so final, if you want to make any changes it's not coming back...

There's a lot of companies out there so a recommendation for the best cut panel suppliers please

Hi all I’m looking for recommendations for companies to supply a plywood floor for a T6, based in the northeast, already wasted money buying a very poor fitting one off eBay, I’ve seen a few camper conversion companies doing some really good ones but they don’t post and are to far away.. any...

For sale a 12mm ply floor for a SWB T6. Was fitted but realised with the floating floor I put under it, it was too tall. Had to get the 9mm. Has been trimmed to fit with the carpeting and has light dried glue on it. £20. Location Basingstoke. Collection only.

Afternoon all I’m assuming if using 5mm ply that I’ll need different hidden clips? I’ve tried the OEM and it’s just not going to work. Assume these from Kiravans will do the trick; Long Panel Fixing Clips - Light Grey (Pack of 25) How are you making the hole through the carpet? Just a big...

I believe I can use the OEM Combi panels as a template to make my own ply panels. I have a 2016 LWB, willing to travel if required.

I thought I could make my own templates for the ply, however this is a little more difficult in practice. Who do you recommend for the supply of ply panels and hidden clips? I’ve already carpeted (I was initially planning to carpet over the ply), so want a panel with the clip locations pre...

I’m looking to get my T6 edition soundproofed insulates and carpeted, after a bit of advice please. Is this a diy job or one best left to the pros? what’s the best soundproofing? Is the silent coat extra thick worth going for? Is it worth ply lining replacing existing panels using the...

Anybody that follows us will already be aware that we never stop innovating and trying to push the boundries of what is possible when it comes to our lining packages on the T6 platform. Recently we decided to try to produce some new unique lining panels to offer our customers more scope to add...

As in the title, Im trying to find a place to buy a piece of 3.6mm ply to make a 1 piece roof/ceiling. Thanks for any suggestions.