Just opening up this thread again.
How would I have a ‘R’ and a ‘Q’ would one have been replaced at some point??
How would I have a ‘R’ and a ‘Q’ would one have been replaced at some point??
Auto Folding Wing Mirrors
- Thread starter T6dder
- Start date
R+Q is correct for folding mirrors - from factory.
Fold on remote you mean?
Yes, this far the understanding has been that it works with these modules.
How To Program Folding Mirrors - Pictogram
Firstly plug in your VCDS cable. The socket is just below and to the right of the steering column above the accelerator pedal. Then plug the USB end into your PC and start the VCDS application. If this is your first time using the software select Options Then [Test] to make sure the...
Unless I'm mistaken - your van is MY17? Interestingly the R+Q modules haven't seen installed on MY17 vans - this far...
Share Auto-Scan?
Fold on remote you mean?
Yes, this far the understanding has been that it works with these modules.
How To Program Folding Mirrors - Pictogram
Firstly plug in your VCDS cable. The socket is just below and to the right of the steering column above the accelerator pedal. Then plug the USB end into your PC and start the VCDS application. If this is your first time using the software select Options Then [Test] to make sure the...www.t6forum.com
Unless I'm mistaken - your van is MY17? Interestingly the R+Q modules haven't seen installed on MY17 vans - this far...
Share Auto-Scan?
Read through this thread and managed to get my mirrors folding by given a long press of the lock button after the coding changes .. So much easier than remembering to do it from inside the van! Surprised I've actually got the right modules for a change! Cheers
easy to follow step-by-step guide, really appreciate the effort in putting this together!Did you get rid of all your sets of door modules “L” model?
I read a thread on here with with interest: unfortunately the replies have been turned off. I have a May 2017 T6 highline with a folding mirror switch but it doesn’t do it on locking. I can hold the key fob locking button for some time but nowt happens: the windows do auto close.
@Loz has contributed to a long VCDS thread suggesting that it can be programmed in yet i was told (can’t remember by who) that on my van it can’t be done.
I do have a Carista and I can see no option for it.
Can it be done??
@Loz has contributed to a long VCDS thread suggesting that it can be programmed in yet i was told (can’t remember by who) that on my van it can’t be done.
I do have a Carista and I can see no option for it.
Can it be done??
@Mick It depends on what revision the door controllers are.
Post a detailed output of the scan and you can see the controller revision.
Post #216 has the details to compare with your results.
www.t6forum.com
I'll merge this onto the end of the topic above.
Post a detailed output of the scan and you can see the controller revision.
Post #216 has the details to compare with your results.
Auto Folding Wing Mirrors
The garage door button on dash is my favourite I dont think it was ever an option for T5/6?
I'll merge this onto the end of the topic above.
Last edited:
@Loz. Thanks. This is the ECU scan of my Carista. I can’t see the code Pauly posted in that thread.@Mick It depends on what revision the door controllers are.
Post a detailed output of the scan and you can see the controller revision.
Post #216 has the details to compare with your results.
Auto Folding Wing Mirrors
The garage door button on dash is my favourite I dont think it was ever an option for T5/6?
I'll merge this onto the end of the topic above.
Nothing attached?
Code:
Detailed ECU info
ECU info obtained with Carista 711099 for iOS:
VIN: WV1ZZZ7HZHH159040
CAN network gateway
Part #: 7E0909901
Component: GW-K-CAN TP20
Software version: 0744
ASAM/ODX identifier: [none]
Coding: 042307 (hex)
[No fault codes]
Engine
Part #: 04L997264
Component: R4 2.0l BTD
Software version: 9540
ASAM/ODX identifier: EV_ECM20BTD03004L997264
Coding: 00254014436501080000 (hex)
[No fault codes]
High beam assist
Part #: 7E0857511F
Component: FLA
Software version: 0003
ASAM/ODX identifier: EV_HighBeamAssisAU316
Coding: 040401E200000100000000 (hex)
[No fault codes]
Transmission
Part #: 0BT300046J
Component: DSG DQ500-7F
Software version: 5302
ASAM/ODX identifier: EV_TCMDQ500021
Coding: 0014 (hex)
[No fault codes]
ABS
Part #: 7E0907379Q
Component: ESC
Software version: 0133
ASAM/ODX identifier: EV_Brake1ESCCONTIVN75XGP2
Coding: 557E409865678487AA75027AA68221E679F700 (hex)
[No fault codes]
Steering angle
Part #: 6R0959654
Component: LENKW.SENSOR
Software version: 0070
ASAM/ODX identifier: EV_LWSKLOVW25X
Coding: 01 (hex)
[No fault codes]
Airbags
Part #: 7E0959655G
Component: VW10Airbag021
Software version: 0018
ASAM/ODX identifier: EV_AirbaVW10BPAVW12X
Coding: 000000000000000000000000000000003231 (hex)
[No fault codes]
Instrument cluster
Part #: 7E0920970S
Component: KOMBI
Software version: 1107
ASAM/ODX identifier: EV_Kombi_UDS_VDD_RM09
Coding: 440F010300 (hex)
[No fault codes]
Infotainment system
Part #: 5C0035680E
Component: MU-S-ND-ER
Software version: 0363
ASAM/ODX identifier: EV_MUStd4CTSAT
Coding: [none]
Fault codes:
15360256 Manufacturer-specific code
05688 Manufacturer-specific code
Immobilizer
Part #: 5K0953234
Component: IMMO
Software version: 1107
ASAM/ODX identifier: EV_Immo_UDS_VDD_RM09
Coding: 000000 (hex)
[No fault codes]
Headlight aiming
Part #: 6R0907357C
Component: AFS-ECU
Software version: 0050
ASAM/ODX identifier: EV_HeadlRegulVWLWRCC
Coding: 0FCE020001000000 (hex)
[No fault codes]
Heater & air conditioning
Part #: 7E0907047AC
Component: Climatic-T5
Software version: 0708
ASAM/ODX identifier: EV_ClimaticT5
Coding: 0000000003 (hex)
[No fault codes]
Parking/steering assist
Part #: 7E0919475AA
Component: PARKHILFE 8K
Software version: 0212
ASAM/ODX identifier: EV_VW75XParkAssis8K
Coding: 31810C (hex)
[No fault codes]
Central electronics
Part #: 7E0937090B
Component: BCM PQ25 Max4
Software version: 0744
ASAM/ODX identifier: [none]
Coding: [none]
Fault codes:
03303 Feedback Locked-Position rear-left
Battery regulator
Part #: 7E0907534
Component: Batt.regelung
Software version: 0744
ASAM/ODX identifier: [none]
Coding: 030B1A73 (hex)
[No fault codes]
Trailer
Part #: 1K0907383F
Component: ConWysTrailer
Software version: 0100
ASAM/ODX identifier: [none]
Coding: 0100000100000000 (hex)
[No fault codes]
Adaptive cruise control
Part #: 7N0907572C
Component: ACC Bosch PQx
Software version: 0211
ASAM/ODX identifier: EV_ACCBEGVW361
Coding: 00005800FE0779 (hex)
Fault codes:
01071 Clutch Pedal Position Sensor (G162)
01058 Function - Constant Charge - CurrentObtained with Carista 711099 for iOS.
Download app: Carista OBD2
Facebook: Log in to Facebook
I would say the "B" nails it down not to have suitable submodules or the functionality in the BCM itself has the shortfall.
That's what I'm afraid - not by a simple coding change anyways.So it’s a big fat NO then
Actually I have a faint impression it seems to relate the BCM version ("B") itself.
A somewhat related thread for future reference.
Folding Mirrors On Comfort Close (again)
Evening All, I have a hopefully slightly different question relating to enabling mirror fold on lock. I have a T5.1 Highline but have used T6 window modules (7E0 959 801 R & 7E0 959 802 Q). They were manufactured October 2018 - If I'm right, this is well into when VW enabled fold on lock on...
My 2016 Euro 6 Caravelle had L modules installed for some reason. I changed the coding from 1 to 3 at the end and activated Comfort functions, and the mirrors now fold on the key. Thanks all!
Morning all, I've read through the thread, I was fortunate to have folding mirrors on the long press of the key when I bought my MY19 Kombi. Is there a way to have the mirrors actually fold automatically when you lock the van?
I seem to be getting through fob batteries because of the long hold.
Cheers
I seem to be getting through fob batteries because of the long hold.
Cheers
