Engine stalling

[Jono21571]

Hi I have an issue with the engine stalling intermittently on idyll and when you drop it into drive or reverse the van is a 2017 t6 t32 4motion dsg 204. It has hand a remap on the engine and gearbox done by Martin at Pendle performance on there rolling road.the remap was carried out not long after I purchased the
Has anyone else come across this or have any ideas of the problem

Ps there are no error codes showing up

 

[Alan Ginger]

Just to add to this thread

I have a 2019 T6 T30 2.0 TDi 150 bhp blue motion DSG

The van has recently stalled a coup of times - also no error codes.
Any ideas what could be wrong please ?

 

[DXX]

Just to add to this thread

I have a 2019 T6 T30 2.0 TDi 150 bhp blue motion DSG

The van has recently stalled a coup of times - also no error codes.
Any ideas what could be wrong please ?

I’d say that’s nearly impossible to diagnose without some detailed information and then it would be a guess.
Was it stalling at idle speed, while in drive / moving and what was the engine speed (RPM) at idle?

 

[Alan Ginger]

I’d say that’s nearly impossible to diagnose without some detailed information and then it would be a guess.
Was it stalling at idle speed, while in drive / moving and what was the engine speed (RPM) at idle?

Many thanks for your reply: stalled at traffic lights just pulling away in a queue .
it was in drive - I had my foot on the brake and moved my foot over to pull away

 

[dsw]

Hi mine is starting to do the same intermittently. It’s like the van doesn’t want to creep. Seems fine once going but just setting off is becoming a problem. Can anyone advise a soloition? Thanks

 

[Alan Ginger]

Hi mine is starting to do the same intermittently. It’s like the van doesn’t want to creep. Seems fine once going but just setting off is becoming a problem. Can anyone advise a soloition? Thanks

My van just stopped doing it, no idea why

 

[dsw]

My van just stopped doing it, no idea why

Ah really, hopefully mine is going to stop it to then haha, thanks

 

[nigleton]

Ah really, hopefully mine is going to stop it to then haha, thanks

Hi
Did you get to sort this issue as I’ve got similar ?

 

[nedwood]

Maybe check your cambelt, a missing tooth or loose tension can cause these sort of running problems.