Folding Mirrors On Comfort Close (again)

[mmi]

Setting channel 84 to 0 from 1 disables it. Switching it back to 1 and the mirrors fold again.

@Loz - any chance to try adaptation channel 84 (set to "1") on your van - although doors modules are both Q-version (unlike @Dellmassive 's and @Deaky 's)?

 

[carlg]

This is my scan, is this the same bcm you have just fitted.

 

[carlg]

My line 84 says 0 n/a

 

[mmi]

This is my scan, is this the same bcm you have just fitted.
View attachment 107835View attachment 107835

View attachment 107836

Hmmm... the BCM you have I have seen only on MY16 vans- what's the letter (in bold) in your VIN: WV1ZZZ7HZGHxxxxxx - G=MY16 or H=MY17

For MY16 it should be just bits of coding ---> https://www.t6forum.com/threads/how-to-program-folding-mirrors-pictogram.1780/

 

[carlg]

Hmmm... the BCM you have I have seen only on MY16 vans- what's the letter (in bold) in your VIN: WV1ZZZ7HZGHxxxxxx - G=MY16 or H=MY17
View attachment 107840
For MY16 it should be just bits of coding ---> https://www.t6forum.com/threads/how-to-program-folding-mirrors-pictogram.1780/

Vin has a H

 

[phazer]

This is my scan, is this the same bcm you have just fitted.
View attachment 107835View attachment 107835

View attachment 107836

Mine is a 90C with HW version 82. If your van is 2016, try the details @mmi provided as that hopefully is what you need. Do you have "L" window modules?

 

[carlg]

Mine is a 90C with HW version 82. If your van is 2016, try the details @mmi provided as that hopefully is what you need. Do you have "L" window modules?

Not sure which modules I have, the ones that can't be programed, we tried a couple times with vcds but nothing worked.
I have been waiting 3 years for someone to find a cure.

 

[gerry]

I think the important thing is to change the modules to have a manual folding at the door and for the my16 and 17 a bcm with a revision: B9082001 channel 83,84,85 in 1

 

[Loz]

@Loz - any chance to try adaptation channel 84 (set to "1") on your van - although doors modules are both Q-version (unlike @Dellmassive 's and @Deaky 's)?
View attachment 107829

Tried all of those and no fold.

 

[mmi]

Tried all of those and no fold.

Thanks for your effort verifying this. So we have reached a dead end again

 

[phazer]

Tried all of those and no fold.

Ahh that's a shame. Must be something in the HW82 software that does the work.

Does anyone know if it's possible to read and flash BCM software with VCP? Or the window modules? Anyone tried it?