Have been following this thread for some time, thanks for all the info.
I have got hold of some OEM H7 headlight units from a Caravelle at a good price from Ebay. They are Valeo/VW units with a manufacturing date on the sticker is May 2018. They look in great condition but wanted to check the DRL terminals for melting etc so wiggled the DRL bulb holder out from the housing (not the easiest to get out and back in) but anti clockwise twist to unlock and a bit of confidence and they unlock, the terminals on the DRL bulb holder look fine, no heat damage.
Planning to fit LED DRL`s either the
Osram w21w. w3x16d. or
Twenty20 582 , any one see any issues using these bulbs for DRLs?
Planning to fit Nightbreaker 200 or 150% H7 into both main and dipped.
Planning to fit LED side lights,
Osram w5w. w2 1x9 5d
All seem ok any words of wisdom?
Watched the videos for bumper removal but none show situation if you have Fog lights, I did read that you disconnect the loom via a terminal clip on driver side as you remove that corner of bumper and that fog lights units are attached to bumper so move as one away from van with bumper.
Is that right? any words of wisdom?
Oh and finally i have Carista Beta so will be selecting the "Dipped stay on with Main beam" option on that.
Anything else i should be aware of?