Language setting in vcds.

[Skyliner33]

I've just been out looking at my vcds to see if I can get a few things to work.

However when I go into Adaptations, then in the drop down menu, everything is in German. Im sure it didnt used to be and a check on you tube shows other peoples are not. Is there a setting I've missed?

Also whilst I think about it when I try to select 46-Central Conv. I get an error message saying (iirc) cant communicate with the....

 

[mmi]

However when I go into Adaptations, then in the drop down menu, everything is in German.

Which module? There certainly are still parts in VCDS which are not fully translated.

Are the adaptation named differently if you extract all available adaptations into file, e.g as here --> https://www.t6forum.com/threads/discover-media-radio-navigation-retrofit.27968/post-386528

Is there a setting I've missed?

No, there's no setting for language.

46-Central Conv. I get an error message saying (iirc) cant communicate with the....

There shouldn't be module 46 on any T6.1. All modules onboard are listed under VCDS tab "Installed".

 

[Skyliner33]

Which module? There certainly are still parts in VCDS which are not fully translated.

Are the adaptation named differently if you extract all available adaptations into file, e.g as here --> https://www.t6forum.com/threads/discover-media-radio-navigation-retrofit.27968/post-386528

No, there's no setting for language.

There shouldn't be module 46 on any T6.1. All modules onboard are listed under VCDS tab "Installed".

Cent. electrics
Adaptations

I’m trying to find the setting for the comfort turn signals to change 3 to 5

my mistake, I was as looking at this screen

 

[Skyliner33]

Which module? There certainly are still parts in VCDS which are not fully translated.

Are the adaptation named differently if you extract all available adaptations into file, e.g as here --> https://www.t6forum.com/threads/discover-media-radio-navigation-retrofit.27968/post-386528

No, there's no setting for language.

There shouldn't be module 46 on any T6.1. All modules onboard are listed under VCDS tab "Installed".

I’m getting the adaptation files now and will pm you.

 

[mmi]

I’m trying to find the setting for the comfort turn signals to change 3 to 5

Look for "ENG141649-ENG115854-Außenlicht_Blinker-Komfortblinken_Blinkzyklen" should have currently "3", change to "5"

 

[Skyliner33]

Look for "ENG141649-ENG115854-Außenlicht_Blinker-Komfortblinken_Blinkzyklen" should have currently "3", change to "5"

Will look tomorrow

 

[Skyliner33]

Will look tomorrow

Bugger just had a go at this and need security access?

Look for "ENG141649-ENG115854-Außenlicht_Blinker-Komfortblinken_Blinkzyklen" should have currently "3", change to "5"

Just had a go at this and need the security access code. Can you point me in the right direction to find it please?

 

[mmi]

Bugger just had a go at this and need security access?

Just had a go at this and need the security access code. Can you point me in the right direction to find it please?

Try 31347 - VCDS should tell the code when you hover mouse over the field.
More codes just in case

MQB platform - Security Codes - work in progress

I'm not sure if anyone else has done the same - but in an attempt to coalesce the community's knowledge of SA codes for MQB platform vehicles into a single reference source, I have collected the "known" SA codes in the table below. This has been (and it remains) a work-in-progress and the...

forums.ross-tech.com

 

[Skyliner33]

Try 31347 - VCDS should tell the code when you hover mouse over the field.
More codes just in case

MQB platform - Security Codes - work in progress

I'm not sure if anyone else has done the same - but in an attempt to coalesce the community's knowledge of SA codes for MQB platform vehicles into a single reference source, I have collected the "known" SA codes in the table below. This has been (and it remains) a work-in-progress and the...

forums.ross-tech.com

Thanks, knew I had forgotten something. Thats the code I used for the mirrors lol.

 

[Skyliner33]

Try 31347 - VCDS should tell the code when you hover mouse over the field.
More codes just in case

MQB platform - Security Codes - work in progress

I'm not sure if anyone else has done the same - but in an attempt to coalesce the community's knowledge of SA codes for MQB platform vehicles into a single reference source, I have collected the "known" SA codes in the table below. This has been (and it remains) a work-in-progress and the...

forums.ross-tech.com

I’m just looking the mouse hover does not work