Sold Personalised Steel Fire-Pit

[evans1089]

What products you using?

 

[Glovehead]

What products you using?

Cleaned the metal with a cellulose thinner to get rid of any contamination then 4-5 light coats of stove paint, quick rub down with wet & dry in between.

 

[Glovehead]

That’s not the living room carpet BTW

 

[evans1089]

Any photos of ones lit guys?

 

[Broadside]

 

[evans1089]

Sweet!!

 

[Glovehead]

Any photos of ones lit guys?

 

[evans1089]

Epic guys, thanks

 

[Tommy]

Just stumbled on this thread, excellent work. My partner is asking if one could be raised (say 400mm) and sat on a stand/trestle type support. If so very interested in a large

 

[evans1089]

Just stumbled on this thread, excellent work. My partner is asking if one could be raised (say 400mm) and sat on a stand/trestle type support. If so very interested in a large

I can provide a base suitable to your required height which the pit would sit on. Not sure what cost would be as would need to draw it to price it.
But yea anything is possible

 

[Tommy]

I can provide a base suitable to your required height which the pit would sit on. Not sure what cost would be as would need to draw it to price it.
But yea anything is possible

Sounds good, look forward to seeing some base ideas and costing

 

[Pedros85]

Nice one @evans1089. Will do a little fire later and share pics.
As it’s stainless steel does it need the paint? Can’t work out if I like it silver or black or to just leave it to go black over time

 

[evans1089]

Nice one @evans1089. Will do a little fire later and share pics.
As it’s stainless steel does it need the paint? Can’t work out if I like it silver or black or to just leave it to go black over time

Peter,
You have it inside out.
Take the sticker off (protective film) so the brushed stainless is on the outside.

I would always paint anything that is outside. But the stainless will look nice. Especially when you make it up the right way

 

[Pedros85]

thanks

 

[Pedros85]

Peter,
You have it inside out.
Take the sticker off (protective film) so the brushed stainless is on the outside.

I would always paint anything that is outside. But the stainless will look nice. Especially when you make it up the right way

Still like the silver…probably best to paint it though

 

[Nigel W]

Peter,
You have it inside out.
Take the sticker off (protective film) so the brushed stainless is on the outside.

I would always paint anything that is outside. But the stainless will look nice. Especially when you make it up the right way

I hadn’t realised either that there is a right/wrong way - what’s the difference between the two sides and does it matter?

 

[evans1089]

I hadn’t realised either that there is a right/wrong way - what’s the difference between the two sides and does it matter?

Under the coating is brushed stainless steel.
The back is dull stainless.

 

[JunglieD]

It must be getting on for a week since anyone chased @Trouts for an update on the bags?! Did the new supplier send you the sample/prices yet?

 

[Pedros85]

It must be getting on for a week since anyone chased @Trouts for an update on the bags?! Did the new supplier send you the sample/prices yet?

Was about to do a subtle chasing message too

 

[Trouts]

It must be getting on for a week since anyone chased @Trouts for an update on the bags?! Did the new supplier send you the sample/prices yet?

thanks guys, feel free to chase. unfortunately the supplier's having a few supply issues of his own
but i am on his back pestering him constantly and have send him another email this morning asking for an update.

sorry guys, taking a lot longer than anticipated.
appreciate your patience/support though