Plastic Underside Part

[SlothBurger]

On my T6 Kombi (2019) this plastic part under the left sliding door area is ganging down. There seems to be a square shaped hole in it but nothing above the hole to attach it back to.

Is it supposed to hang like that as van has just been in garage & I don't recall it being like that before it went there?

 

[Deaky]

Looks like the piece before it is missing. I think there should be a cover over the fuel tank

 

[TrevorK]

OEM plastic underbody trim/covers

Can anyone help with this issue I have with the front black plastic under the van covers. These are all down both sides underneath the van. I need a new one for the front off side. Probably been hit by snow/ice and has been well and truly busted!! Has anyone removed these permanently ? I can't...

www.t6forum.com

There is a fair bit here and some diagrams.

 

[SlothBurger]

OEM plastic underbody trim/covers

Can anyone help with this issue I have with the front black plastic under the van covers. These are all down both sides underneath the van. I need a new one for the front off side. Probably been hit by snow/ice and has been well and truly busted!! Has anyone removed these permanently ? I can't...

www.t6forum.com

There is a fair bit here and some diagrams.

Ugh. Yet another bit of this van that breaks when it shouldn't.

 

[JOG]

Puddles are usually the reason they get torn off

 

[SlothBurger]

OEM plastic underbody trim/covers

Can anyone help with this issue I have with the front black plastic under the van covers. These are all down both sides underneath the van. I need a new one for the front off side. Probably been hit by snow/ice and has been well and truly busted!! Has anyone removed these permanently ? I can't...

www.t6forum.com

There is a fair bit here and some diagrams.

Good thread & seems to be same as I'm missing but very difficult to figure out which part is the bit I need.

 

[SlothBurger]

Puddles are usually the reason they get torn off

I haven't been in a puddle with it since I got it. Seems to be missing since it was in the garage.

 

[JOG]

What were you having done?

 

[SlothBurger]

A thermostat coolant sensor replaced.

 

[SlothBurger]

I finally got this part. It didn't come with the fitting parts but most of the screws seem to be still on the underside of the van from the old one that fell off. I'd like to find a way to fit it back on as securely as possible. Presumably mudflaps would help prevent it getting pulled off again but I don't have mudflaps yet.

Part number: 7E0-825-205-F - 7E0-825-205-G

Has anybody a video of fitting this part?