Replacing OEM LEDs in Cargo area using original wiring loom

[Atwcm]

Thanks Deaky and Dellmassive. I'll be running the +12v from the LB as suggested.
Howzat - no they're not switched on the T6.1. Just timer controlled.
Thanks for the suggestion of bulb removal but I'll be removing the two OEM units entirely and replacing with six new LED recessed ceiling lights (each of which is 2.5W which I'm hoping won't create an overload on the OEM wiring loom timed circuit - please shout up if it might as that'll put an end to this plan - cheers)

 

[Howzat]

....I'll be removing the two OEM units entirely and replacing with six new LED recessed ceiling lights (each of which is 2.5W which I'm hoping won't create an overload on the OEM wiring loom timed circuit - please shout up if it might as that'll put an end to this plan - cheers)

=1.25amps. The smallest fuse is 5amps so you'll be fine.

 

[Atwcm]

=1.25amps. The smallest fuse is 5amps so you'll be fine.

Marvellous - thank you