Roof Spoiler starting to unbond
- Thread starter Ranger13
- Start date
-
- Tags
- roof spoiler
T-cut area if needs be..
Yep.
If your not there probably a blunt chisel and hammer.
I was going to say what is wrong with VW
@T6 Dave I don't suppose you have a pic of the T6 sportline spoiler. I'm a little lost as to what it looks like, I've seen a few versions of spoilers and being more and more confused by aftermarket PU such that I'm not sure what is OEM. I think I prefer the T5 sportline spoiler angles but hard to say. Any help welcome.
Hi
Do VW only make 1 tailgate OEM spoiler? Do they make a different one for sportline?
Kind Regards
Nick
@Phantom that's a very good point too, I am a little lost on that as there would appear to be two types appearing on the market, one similar to the T5 model with the swept down sides and the other more like straight out ( which I'm not fond off) apparently the T5 spoilers wont fit the T6 tailgates but I have only been advised that so a little unsure.
In case it's relevant, spoiler = no tailgate bike rack.
A few don't seem to realise.
A few don't seem to realise.
The T6 OEM tailgate one sticks straight out and does not have any returns down the side. From a side profile it appears to stick up in the appear a bit.
Swiss Vans have just started doing a plastic spoiler for the T6 tailgate that is identical to the T5 sportline one I.e indent around the high level brake light and returns down the sides, albeit the mounting surface matches the T6 rather than the T5. From a side profile it slopes downwards slightly from leading edge to trailing edge.
I believe this is similar to one that Leighton Vans do, however they'll not sell you on unless it is on a van that you buy from them.
However folk are correct the OEM T5 tailgate spoiler will not fit on the T6 tailgate.
If you want to see a Swiss Vans style one ask @andythom188 for a picture (this is the fibreglass version that Swiss are just replacing with their plastic version). There are lots of other people with the T6 OEM one.
Swiss Vans have just started doing a plastic spoiler for the T6 tailgate that is identical to the T5 sportline one I.e indent around the high level brake light and returns down the sides, albeit the mounting surface matches the T6 rather than the T5. From a side profile it slopes downwards slightly from leading edge to trailing edge.
I believe this is similar to one that Leighton Vans do, however they'll not sell you on unless it is on a van that you buy from them.
However folk are correct the OEM T5 tailgate spoiler will not fit on the T6 tailgate.
If you want to see a Swiss Vans style one ask @andythom188 for a picture (this is the fibreglass version that Swiss are just replacing with their plastic version). There are lots of other people with the T6 OEM one.
Similar threads
