Show us your 20’s

[coullstar]

Trying out 20's again, was going for the Gp7's but these came out and quite like the unusual design. Winter all round at the moment so will see how 20's fair in the snow etc. 265/40/20 tyres fitted.

Bit manky already after fitting yesterday.

 

[t6blo]

I like those alot @coullstar

 

[WinFreak]

So after searching for a while for a set of 20s that I like made the purchase of these Wolfrace eurosport Dortmund wheels in gloss black.
Anyone running same?
My T6 being silver will give a nice contrast with the gloss black rims,trial fit on rear in pic

View attachment 180596

View attachment 180597

I have these

 

[Adam H]

AXE EX20's
8.5J front 10J on the rears.
In desperate need of a refurb before spring hits.

 

[Reedspeed46]

Got to be Judds for me too

Judd 311R - 9" et38 Front, 10.5" et45 Rear - with 275/35 Eagle F1s.... and of cause the obligatory B14's

View attachment 55981 View attachment 55982 View attachment 55983

What you lowered it by -50mm ?

 

[TransporterTur]

I have these

View attachment 182653

Have you put spacers on the rears,I reckon 15mm spacers on mine with front as is will be

 

[WinFreak]

Have you put spacers on the rears,I reckon 15mm spacers on mine with front as is will be

I was thinking about that, would be nice to have them sitting the same!

I’d like to lower the front of my van a little more too, have some thread left on the coilovers but can’t be bothered to to for an alignment again!

 

[mattyd247]

Just my 2 pence worth on spacers.

I fitted 20" Cades Hera which are ET38 and 9" wide.

The fronts were pretty much inline with the wheel arch but the rears were around 15mm inside so 15mm spacers on non-staggered wheels seems to work well.

 

[BenT5]

Just my 2 pence worth on spacers.

I fitted 20" Cades Hera which are ET38 and 9" wide.

The fronts were pretty much inline with the wheel arch but the rears were around 15mm inside so 15mm spacers on non-staggered wheels seems to work well.

View attachment 186501

View attachment 186502

Looks great, what tyres are you running on the rear?

 

[mattyd247]

Looks great, what tyres are you running on the rear?

255/40 20 Nankang

 

[BenT5]

255/40 20 Nankang

Thanks, I'm waiting on my spacers to arrive, have Navis 20X9 ET42 with 265/40 on the rear (255/40 on front) but lowered about 100mm. Thinking the 265's will be too wide but hoping the 255's will be ok. Need new rear tyres soon anyway so I can try with the fronts before I buy

 

[OwenOB]

Just my 2 pence worth on spacers.

I fitted 20" Cades Hera which are ET38 and 9" wide.

The fronts were pretty much inline with the wheel arch but the rears were around 15mm inside so 15mm spacers on non-staggered wheels seems to work well.

View attachment 186501

View attachment 186502

The Cades Heras look mint .
I was thinking of getting Heras in 20” also, my van is dropped 55mm and running in 18s. I was just wondering what’s the ride like in 20s as I’ve comments about it being “crashy”

 

[jayc001]

Just fitted these 8.5x20" BBS 2 pieces rims. Brand new old stock from Range Rover dealer in middle east. Apparently they were option on export HSE's back in 2009.
They are ET58 so I'm running 20mm spacers up front and 30mm rear. Tyre wise 255/40 20 Accellera PHI fit nicely in my opinion and still provide a bit of comfort and kerb protection.

 

[LondonLad]

Loving these new 20inch Supermetal Chargers! The kids like them too

 

[LondonLad]

@TIZ WOZ those wheels I was telling you about in post above.

 

[RedPete66]

Anyone know what brand these wheels might be?

 

[BenT5]

Loving these new 20inch Supermetal Chargers! The kids like them too
View attachment 193693
View attachment 193694

Oh yeah nice ... you may need spacers to fill out the back ... post some pics when fitted

 

[LondonLad]

Oh yeah nice ... you may need spacers to fill out the back ... post some pics when fitted

Thanks for info. Not sure if I am going to fit/keep them, can’t decide.

 

[LondonLad]

Can you fit 20” rims without doing anything to the suspension and not be on cloud 9 aka too high up for sensible handling etc?

 

[harveyj09]

My Bentley 2 piece 9x20’s, re drilled 5x120, powder coated gloss black lip & barrel, satin black faces. Don’t know if they suit the van without it being a lot lower.