Side door locked because a piece of plastic is stuck on the sensor
can i ask if you got anywhere we also have this issue and don’t have the same door mechanism as the photo
thanks
BurlingtonBerty
New Member
I have the same issue and don't have the black mechanism with the cables. I just have the white plastic box with white pipe going to it and the thing with loads of wires going into it.
My coat got stuck in the door and it still there. Can't see any way of releasing the door and getting it out so can't drive the van at moment as it's hanging out of the side. The van has seats but it's a converted T6.1 panel van.
Can any one help?
I think you've fallen into the situation I wondered about in my earlier post:
www.t6forum.com
So I don't think the vans built at the factory without the seats have the crash clutch system - something you might want to think about should the worst happen as it's annoying now but more critical if you've been in an accident.
You might only have an electric door release, so you might need to try temporarily connecting the door electrics to the ones in the B pillar to power things up is the obstruction is stopping the contacts.
I'd also have a good look up at the rear lock area, even if the clutch isn't fitted there might be either an external mount where the cable would fit or similar that might be able to trigger the lock.
Side door locked because a piece of plastic is stuck on the sensor
Hello! I have a problem with my transport T6.1 Once I closed the side door and because of the wind, a plastic bag got stuck between the door and the frame, exactly where the contact sensor is. I didn't really realized this when this happened and I closed the van, so the side door got locked...
So I don't think the vans built at the factory without the seats have the crash clutch system - something you might want to think about should the worst happen as it's annoying now but more critical if you've been in an accident.
You might only have an electric door release, so you might need to try temporarily connecting the door electrics to the ones in the B pillar to power things up is the obstruction is stopping the contacts.
I'd also have a good look up at the rear lock area, even if the clutch isn't fitted there might be either an external mount where the cable would fit or similar that might be able to trigger the lock.
Looks like you got it fixed and found the cable tucked up to trigger the lock:
www.t6forum.com
Sliding door won't open, coat trapped in door help needed
Vehicle is a 2020 T6.1 converted panel van. Last night my coat got stuck on the front of the sliding door. The coat won't come out of the door and the door will not open. I've removed the door card and can see a white plastic box with a white pipe leading to it. Can also see a unit with...
BurlingtonBerty
New Member
Yep, posted in two places in the hope of getting advice and I did. The advice I got saved me a day of messing about and my ego is just about intact.Looks like you got it fixed and found the cable tucked up to trigger the lock:
Sliding door won't open, coat trapped in door help needed
Vehicle is a 2020 T6.1 converted panel van. Last night my coat got stuck on the front of the sliding door. The coat won't come out of the door and the door will not open. I've removed the door card and can see a white plastic box with a white pipe leading to it. Can also see a unit with...
This forum is fantastic.
