T6.1 12v socket/cig lighter fuse location

T

Tribblehunter

New Member
VIP Member
Hi all.
Recently purchased a 2022 5 seater T6. It has 2 12 volt sockets. One by the gear shift and one above steering wheel on top of dash. Factory fitted.
Neither are working.
I have looked at all available fuse layouts and threads and they refer to the fuses being under the passenger seat.
There are no blade fuses under my passenger seat. Only loom plugs and a couple of 40 amp fuses ( I think they are fuses. Rectangular clear top. 40 amp label. )

Before I pull every fuse on the board can anyone enlighten me?
 
You have VIP membership so you should be able to download this - look for the 15A fuses

www.t6forum.com

T6 - T6 Fuse Layout SC,SD,SF (NON-CALI)

T6 Fuse Layout SC,SD,SF (NON-CALI)
www.t6forum.com www.t6forum.com

I think for your van they will be in fuse box SC in the centre dash. Most likely Fuse 49

There may be a second 20A on in fuse box SF Fuse 11, again centre dash.
 
Success!!
Thank you very much. It was under the passenger seat. I just could not see it. Tucked behind the rail.
Many many thanks to you and this forum for the help. Well worth the membership.

image.jpgimage.jpg

This might help anyone with the same issue. There is a little tag ( shown in pic ) which will release the fuse holder. It can then be pulled down and out making replacement of fuse easier. IMG_0559.jpeg
 
Good day all - as a follow up to this thread... are any of the fuses under the seat in a T6.1 (as opposed to a T6) ignition live?

Or do I have to go from the fusebox between the steering column and the headlight switch?
 
Nope, they're the same there.

The only very slight exception might be if you have OE full towbar and also use VCDS to alter the behaviour of the module, in which case the fridge pin may go on and off without trailer detection.
 
roadtripper said:
Nope, they're the same there.

The only very slight exception might be if you have OE full towbar and also use VCDS to alter the behaviour of the module, in which case the fridge pin may go on and off without trailer detection.
Click to expand...
OK - well I do have OE full towbar and VCDS so.... tinkering time methinks!!

Any idea of VCDS adaptation(s) required to achieve this (or where I can find on here?)
 
See my thread here

www.t6forum.com

T6.1 OEM Towing Socket behaviour

So today I have been tinkering with my towing socket and thought this might be useful info in a post for others. My van is a MY21 T6.1 Caravelle with full towing electrics from factory. (Edited to add mine is a single battery system) This is my experimental 13 pin plug. There are 4 grain of...
www.t6forum.com www.t6forum.com
 
Can anyone help with a repair cable for this under passenger fuse holder, ideally 1.5mm? I’ve used the search a few times but can only find the 0.5mm version.

Thank you
 
Thank you though that’s the thread I read. When I copy the part numbers either the cab size is too small or the end is the wrong type.

Some of the links to eBay no longer work either.
 
  • Like
Reactions: mmi
I went a different route and kept a look out for alternative VAG vehicle fuseboxes on eBay. Annoyingly many are sold cropped very short but keep looking and you'll find ones that have a reasonable tail.

I got a Passat and a Golf one and a couple of evenings depending got me a collection of connections with 15cm cable tails and some spare relays and OE fuses.

I can then make up additional wires as I need using crimp connectors. Not quite as super neat but...

www.t6forum.com

Roadtripper's Caravelle tinkering

Well, bother. The field we were going to stay in and experiment is waterlogged so it's had to be called off. Anyone got a field I can borrow :rofl:
www.t6forum.com www.t6forum.com
 
I was hoping to buy a single repair cable with two ends on so I can cut it in half but can’t find the right part anywhere.
 
I realise my error now, the crimp that the auto electrician fitted for the Alpine Amp appears to be the wrong one. It wasn’t until I removed the passenger seat this evening that I was able to see inside the fuse holder. I’ve bought a couple of repair cables.
 
roadtripper said:
The wiring diagram for the 12v sockets is this one - be warned it's a bit of a monster as it covers every factory option


The shows that U1 and U5 (which should be the sockets you have) are both fed from SH6

SH6 is the one mounted under the passenger seat


That's the "standard" wiring at least
Click to expand...
Hi
So I’ve got to my fuse under the passenger seat and the fuse is fine, I don’t seem to be getting any power to the fuse so is there something or somewhere else I need to look!! Can’t seem to trace it back??
 
Tribblehunter said:
Hi all.
Recently purchased a 2022 5 seater T6. It has 2 12 volt sockets. One by the gear shift and one above steering wheel on top of dash. Factory fitted.
Neither are working.
I have looked at all available fuse layouts and threads and they refer to the fuses being under the passenger seat.
There are no blade fuses under my passenger seat. Only loom plugs and a couple of 40 amp fuses ( I think they are fuses. Rectangular clear top. 40 amp label. )

Before I pull every fuse on the board can anyone enlighten me?
Click to expand...
Hi did you find the fuse for the 12v sockets as I have no feed to both of mine,I’ve checked all fuses beside steering wheel with a tester and they seem ok.I would have thought they would be at least 25amp?
 
Found a solitary 20amp fuse under passenger seat blown now has power to it still no power to 12v sockets don’t know what it’s for ?
 
You must log in or register to reply here.

Similar threads

M
T6.1 Cigarette Lighter fuse
Replies
10
Views
553
roadtripper
roadtripper
W
Daylights and dash mounted 12v socket
Replies
2
Views
482
dubber36
dubber36
B
Which Fuse - rear 12v
Replies
0
Views
142
Boris_SH
B
ginkster
[T6] 12V Dash Sockets both not working
2
Replies
25
Views
4K
Madpasty
M
M
T6.1 12v Socket Switched Live
Replies
2
Views
784
Mister-E
M
Back
Top