TransporterHQ (THQ) Aftermarket Headlights

[Thegee6]

Thanks. I’ve fitted them and will see how they perform. The holder must be the same as the V3 and I know THQ supply H1 led bulbs for these. I’m assuming they will be fine.

 

[DXX]

Some notes I took when installing V2’s, might help:

Outer bulb fitted; Osram 64210, H7, 55W. It’s possible to use the spring clip in place, squeeze spring clips together and manoeuvre around cables. Three tabs on bulb, unique tab is at top.
Inner bulb fitted; Osram 84150, H1, 55W. It’s deep inside. Push spring clip forward and outwards to release. Hinge is at the bottom, single positive cable, negative goes to the holder.
Flat on the bulb is at the top.

 

[Thegee6]

Finally got to try my THQ V2 in the dark tonight with the HID 35w dipped and THQ H1 led bulbs. I must say I am mightily pleased with the performance and miles better than the standard headlights. I also fitted the TravelinLite led fog light bulbs to compliment the lights. Only issue that was encountered was the led main beams put the bulb failure light on the dash. But I’ve had the bulb monitoring coded out for the main beams and no further issues. I had mentioned previously that I couldn’t rotate the H1 bulbs to their correct orientation, but this hasn’t seemed to of caused any problems as the main beam is still great IMO. Thanks a lot guys for all your help

 

[Gringo73]

Finally got to try my THQ V2 in the dark tonight with the HID 35w dipped and THQ H1 led bulbs. I must say I am mightily pleased with the performance and miles better than the standard headlights. I also fitted the TravelinLite led fog light bulbs to compliment the lights. Only issue that was encountered was the led main beams put the bulb failure light on the dash. But I’ve had the bulb monitoring coded out for the main beams and no further issues. I had mentioned previously that I couldn’t rotate the H1 bulbs to their correct orientation, but this hasn’t seemed to of caused any problems as the main beam is still great IMO. Thanks a lot guys for all your help

Just remember to swap out the H1 LEDs before you go to the test centre

 

[dubber36]

Just remember to swap out the H1 LEDs before you go to the test centre

My Scirocco passed with LED main beams. The tester said he was only interested in dipped beam, as in theory, no one gets dazzled by main beam unless you haven't dipped them.

 

[Thegee6]

I had HIDs in my old T5.1 and all the tester was concerned about was the beam pattern. You can’t fault the pattern in these headlights. I had them aligned where I have my MOT and they never said a word

 

[Mark72]

Can I code my main and full beam to work together using Carista

lights are Transporter HQ led v3

I can see anything on the app to change this

any help would be great

 

[Jack T]

On the Beta version of the app you can.

 

[dj_]

Hi guys! My T6.1 with H7 halogens has a dial that adjusts both headlight beams up and down.
Out of curiosity - does the T6 also have that? And when you change over to the THQ LED DRL headlight, do you still get to do that?

 

[Gringo73]

Hi guys! My T6.1 with H7 halogens has a dial that adjusts both headlight beams up and down.
Out of curiosity - does the T6 also have that? And when you change over to the THQ LED DRL headlight, do you still get to do that?

Yes..

 

[dj_]

Yes..

Cool! Thanks mate

 

[dj_]

Hi again! How quick is the warm up time of the 35w HID lights you guys are using in the low beams of the THQ headlights?

 

[dandan88]

Guys I was wondering if anybody has had any experiences with thq;s new v3 headlights? I’m about to press the button but, Before I do I need your help if poss.

Most appreciated

 

[Jwardy23]

Guys I was wondering if anybody has had any experiences with thq;s new v3 headlights? I’m about to press the button but, Before I do I need your help if poss.

Most appreciated

I’ve recently fitted v3 headlights and really impressed with them. I do wish I hadn’t bought bulbs from them and got the HID lows and LED high beams that are mentioned on the thread (which are now next to buy on the list)

 

[dandan88]

Cheers, what are the indicators like are they very dim? What are hids are they high intensity discharge things, where are you buying them from? And led highs, that means nothing to me, excuse my ignorance but I’m proper baffled

 

[Ads_Essex]

Guys I was wondering if anybody has had any experiences with thq;s new v3 headlights? I’m about to press the button but, Before I do I need your help if poss.

Most appreciated

You sound concerned, so you’re probably best extending your research a little further.
These threads may help:

thq

www.t6forum.com

 

[Jwardy23]

Cheers, what are the indicators like are they very dim? What are hids are they high intensity discharge things, where are you buying them from? And led highs, that means nothing to me, excuse my ignorance but I’m proper baffled

I haven’t had an issue with the indicators.
I’ve just got halogens in the high beam and they’re yellow so don’t match the low beams.
They’re linked somewhere in the thread ^

 

[dandan88]

Ok cheers jwardy, think I may need to do some extended research

 

[david173]

Drove though wales in the drizzle and dark last night with my H4's, need I say more I read this whole thread this morning......

Thanks all for your input, testing and research much appreciated
Ill be ordering THQ V2 and fitting the HID kit. I think some of the older links are now broken or moved to the HID kit @dubber36 and others had great success with? when I clicked it came up with multiple kits. I'm 95% sure, but before ordering wanted to check. Apologies I know its covered to death but id rather be sure.

H7 Terminator 35w HID XENON CONVERSION KIT CANBUS ERROR FREE

I was going to get 4300K, typical my luck they are out of stock!

Thanks

 

[dubber36]

Those are the ones.

I spoke with Xenon Bulbs yesterday as I've bought a bi-xenon projector kit for the Fabia. They told me they were getting new stock in a couple of weeks.