Window comfort close not functioning [Resolved]
- Thread starter huw169
- Start date
-
- Tags
- electric windows
I think byte 3 bit 7 is not relevant for this - mine (actually the current and the previous T6) do not have that set neither has @Dellmassive 's 
In addition quite a few others I have scanned from factory have that bit "0". Byte 3 = "3A".
EDIT: A copy from German VCDS + google translation of Byte 3 Bit 7.
EDIT2: typo.
In addition quite a few others I have scanned from factory have that bit "0". Byte 3 = "3A".
EDIT: A copy from German VCDS + google translation of Byte 3 Bit 7.
EDIT2: typo.
Last edited:
Drive the window down with the button, let off, press down again, hold for three seconds.
Pull the window up to the top, let go, pull the button again, hold for three seconds, let go, should be reset.
Yes, that will be the problem.
Thanks all. I did the reset procedure on the passenger window and one touch now works on both sides.
Then I undid my meddling with the coding and it all works on the fob. Didn't try the key in the door as its raining, but would imagine that is now working too. Confirm tomorrow.
Thank you for all your comments. Every day is a 'school day', as they say
Then I undid my meddling with the coding and it all works on the fob. Didn't try the key in the door as its raining, but would imagine that is now working too. Confirm tomorrow.
Thank you for all your comments. Every day is a 'school day', as they say
Turves
New Member
On this thread: I’ve had the battery out and had the same thing. From reading the comments from 2 threads I found that if the passenger window one touch and ‘auto comfort close on locking’ both don’t work you need to do the “close window-release, let off, then up button again and hold for 3. Do the same in open window” on passenger and drivers window. I’m probably repeating what has already been stated but that worked for me. Thanks for all the advice
On the subject of resetting windows, disconnected the battery a few days ago. Reset the drivers one touch close, tried to do the passenger and heres the issue.
Passenger window goes all the way down held for 3 then as soon as i pull button up (holding) the window comes up about 25mm stops then I have to release the button then pull up again to bring the window all the way up.
Tried this numerous times and one touch close won't work on passenger side.
Passenger window goes all the way down held for 3 then as soon as i pull button up (holding) the window comes up about 25mm stops then I have to release the button then pull up again to bring the window all the way up.
Tried this numerous times and one touch close won't work on passenger side.
disconnect the battery again for 10mins . . .
then reset all the windows again.
or just follow this:
[Guide] Full Van ECU Reset (Capacitive Discharge) -- How I Done It --
Full Van ECU Reset (Capacitive Discharge) -- How I Done It -- The T6 is full of ECU`s, Modules, CAN Buses and Data packets . . . . . Just like your Phone or PC right. The motor vehicle industry has spent years with research and development making the modern car/van Data and electrical system...
.
I had that problem weightlifting
Similar threads
