Search results for query: egr

You would need to remove the EGR and buying a blanking kit for the pipes. Then get it mapped out of ecu. When my EGR in my trusty works van went for the 3rd time I bit the bullet and had it removed and mapped out. Vans been great since

Thanks for that, just need the egr flow rate. Wonder if there is a sensor or if it calculates it some how.

So, I have had the EGR assembly removed completely, blanked off and a coolant bypass pipe fitted due to a coolant leak suspected from the EGR cooler. However, despite the tuners efforts I'm assuming a temperature sensor is still being read and needs to be "disabled" perhaps. Would any of you...

...your feedback on. I have a 2015 CFCA T6 Multivan. I've now reconditioned the engine and had a new turbo fitted, thanks to the corroded EGR cooler that we all know about. My mechanic blocked off and deleted out the EGR function. I have the van back now and am driving it regularly. I...

When I looked into this darkside said I would have to remove the dpf. So I went down the tafmet route instead, 20km with the tafmet fitted no issues and dpf regen as normal. It may the way tuners program out the egr is the only thing I could think that would stop the regen process

...Plan) for my ex AA 2017 T6 150 with 69k miles. The don't have any pre checks now it just has to be under 6 years and under 100k miles. Had the EGR code come up with EML so booked into Sinclairs Van center in Cardiff today. They came back and said an EGR flush is needed which isn't covered by...

Hi guys Had a few of these EGR low flow faults lately on different vehicles. On one vehicle i removed the cooler and tried to clean in but with no luck. The cooler is a bit different so I decided to have a look inside and discovered why you’re wasting your time trying to clean them out. There’s...

Attached the EGR flow rate as ECU reports it - in Torque app format - T6 EU6 engines. EDIT: IDE07377

Hi all, I know this is a long talked about subject but I have found my dream spec van but it’s an early T6 BiTDi with the ‘C’ revision EGR (I asked the dealer for the code on the EGR!). My thought is to go to the dealer with an oil test kit, send it off to be tested, then if it comes back bad...

I think, from reading numerous related threads, that the CAAC engine doesn't suffer so many EGR related problems as EU6 engines. What symptoms did you have?

My van’s been in for investigation today about the ongoing coolant loss. A different garage has stuck a camera in the new EGR and found it contains water. There is apparently a service bulletin that requires some new modified bits when fitting an EGR or it risks over heating the EGR and...

...Runs fine for the first 30 seconds then goes to lumpy/misfire running until it warms up. Then no problem. Interestingly if I disconnect MAF or EGR it works nice immediately. MAF new, HP EGR new, LP EGR new, Injectors rebuilt. I dont want to steel the topic as my car is Passat with CRLB engine...

Hi Dell. Re EGR, did you do anything with the EGR I sent you?

I’ve had a series of engine faults, ranging from glow plug errors to EGR related errors. Having an investigation done this week, I hope it’s just a new set of glow plugs, but just so I know, what would the cost be for supply (VW OEM part) and fitting of new EGR? (It’s an independent dealer, not...

Check out this thread: [T6_measured] Monitoring DPF regeneration, DPF condition, EGR operation

...and a 67 plate. Got it about a month and a half ago. Engine light came on within a week, got plugged in and it said it was something to do with egr, got it booked in and apparently it was a problem with the alternator so that got changed, 3 days later came back on and then they cleaned the...

Hi all. Having a nightmare. I stripped egr off other day then get the new one from TPS. It doesn't come with the rubber/metal tube that joins the egr to the housing on the block. Mine stuck in old egr and getting it out damaged the rubber. According to TPS you have to buy the whole housing at...

I got a quote from Darkside Developments and they said to just replace the egr valve and not the cooler..? Is this normal.?

Hi, No experience with Darkside but they seem to be highly recommended. If you are going down eliminating the EGR valve it needs to be mapped out so you don’t get any warning lights. And fit blanking plates so no hot gases are entering the EGR cooler. As you know if the EGR cooler breaks down...

...memory since July 2021 (since 20 months now). Eventually managed turn on the emission light at event number 31 - thus had a priviledge to have EGR flow tested. The result - pending - the ODIS went to an unending loop without a concluding result. Meanwhile, I think I have reproduced the EGR...