Search results for query: centre bore

I don't think the gold part is a separate spigot ring, I think it is part of the spacer. I believe they are a combined spacer/centre bore adaptor (see pic below). I assume you will have to remove the black spacer/gold spigot and fit a correct spigot ring for your wheels and shorter bolts.

Thanks, They do need spigot rings I have the bolts and will include these. With my suspension setup, they have never rubbed in anyway at all front or rear. cheers

You would definitely need to do further mods to fit those Bentley wheels to a T6 or T6.1, the centre bore is too small for T6/6.1 as well as the PCD being different as already stated.

...by others, my speedo is now a total match for gps through the range. Fitment appears tight in places but no rubbing whatsoever. Significantly more comfy than the 18's I had on too. Centre bore on these is direct fit, however certainly my alloys are tapered seat so couldn't use the factory bolts.

Thanks so much for your helpful advice, it really is a minefield. Great photos, the van looks stunning on these wheels. Just about the perfect ride height for my tastes too, how low have you gone?

This is brilliant thanks a lot Matt. 60 and 80mm looks good

They sure look good. Will one of those new wheels fit in the spare wheel space?

Hi @j4ckal the hub spacer comes off on its own.

I'm not sure if that's an issue but Centre bore on these 16" wheels are 70.1mm but T6 requires 65.1mmm

10mm H&R 5x120 65mm centre bore, google that and you should find some oh and make sure they’re hubcentric

A flatter profile allows the wheel to have a deeper centre bore, thereby giving more calliper clearance. As seen on the 9, again with ET40 In case you hadn't guessed, i have 9 and 9.5 on mine Edit: good illustration of 9.5 concavity

The stud dimensions should be 5 X 120 with a centre bore of 65.1 for a T6 / T5 hub.

if you find where to tap it off, please let me know!:cool:

Hi Daniel. They will fit the vast majority of T6s just fine. The 38mm offset on the 10” wide rear might only be a problem on really low vans, or a Caravelle or similar which has a thicker door card which can rub when you open the sliding door. For those vans Velare also do a 45mm offset on a...

Landrover wheels have the same PCD, but have larger centre bores so will need spigot rings. This place has lots of info, List of car vendors and makes. Wheel fitment and tire size guide and knowledge base.

Thanks for the idea. I am that bored at the moment that I'm reading these long threads all the way back.... I would imagine the LED is fed from a BCM output, so you could tap off the feed there, rather than ll the way from the driver's door. It probably needs an LED in the centre of the dash too...

...alloys, with tires for sale. Specification: Size: 20 Inch Width: 8.5J & 10J Offset ET: +35mm & +38mm Concave: 40mm & 60mm PCD: 5x120 Centre Bore: 72.6mm (72.6 - 65.1 spigots included) Max Load (per wheel): 875Kg All tires have plenty of tread left. They aren't perfect - hence the price...

What we have here is another example of someone who spends too much time sifting through selling sites. 9 full sets of centre caps in the 2 styles you see in the pictures (slots or holes) These are all off 2017 T6s and all in great condition. £20 a set including postage. See eBay for just...

The spigots on these wheels are a bit odd. The centre bore is 84mm with a large metal spigot ring that takes it down to 65mm. Apparently Wolfrace stopped making the 72mm version and started producing the massive rings to go with the 84mm version.