Search results for query: centre bore

...the wheels on my T32 T6 Kombi on standard suspension I’ve seen some from an older Touareg. Thay are 9Jx19H2 ET60 PCD is 120/5 and centre bore looks right. They are fitted with 275/45/19 tyres. Will they fit straight on or will I need spacers? Will they make the ride harsh? Thanks in...

VELARE VLR08 20" MATTE GRAPHITE Size: 20 Inch Width: 8.5J & 10J Offset ET: +35mm & +38mm Concave: 40mm & 60mm PCD: 5x120 Centre Bore: 72.6mm (72.6 - 65.1 spigots) Max Load (per wheel): 875Kg

...20" Navis Schmoov steel wheels in the following fitment Front 8.5 et35 | Rear 10 et40 Diameter: 20 Inch Bolt Pattern: 5×120 Fitment Only Centre Bore: 65.1 Colour: ANTHRACITE Style: Smooth Steel Wheel Load Rating 1100kg (per wheel) I ordered these before I sold my van so no longer needed, I...

A quick google says they definitely need the correct centre bore.

hmmm, yeah, the 17in version has a 65.1mm centre bore and those explicitly show up as T6 compatible. Not sure about the 16in ones, a slightly too big centre bore might not be a problem given the spigot will still fit through. Hopefully someone who knows more about wheels than me will be along...

...some advice. It states the wheels are staggered Specification: Size: 20 Inch Width: 8.5J & 10J Staggered Offset (ET): 35 & 38 PCD: 5x120 Centre Bore: 72.6mm Max Load (per wheel): 900KG Velare VLR16 20 Black Polished Load Rated Alloy Wheels T5 T6 - Vanstyle Velare VLR16 20 Black Polished...

Wolfrace Wolfsburg 20” Gloss Black Alloy Wheels with Tyres Size: 20” x 8.5J Offset (ET): 42 Centre Bore: 72.6mm (Spigots Included) PCD: 5x120 Load Rating: 880kg Per Wheel (T32 Capable Wheel) Tyre Size - 275/40 R20 105W XL, EXTRA LOAD Tyres & Wheels in Excellent Condition £750.00 Happy to...

Does the centre bore matter then? I was guessing as long as the pcd it 5x120 they’d slap on, would just be a case of getting some aftermarket centre caps to fill the hole? I’m only basing it from my old defender, I used to have some factory steels then bought some modular wheels and I’m sure I...

What steels are you trying to put on the van? to tight would indicate the centre bore (the hole in the middle of the wheel) is to small or you already have a spigot ring or they can be called a hub centric ring installed. To big and you will need a spigot ring to stop any movement as this video...

Is it worth advertising these Bentley wheels on here? I’d obviously provide pictures

Here you go, I must be bored :) Below assumes the distance between the centre of the front wheel to the underside of the wheel arch to be 470mm

Thanks, They do need spigot rings I have the bolts and will include these. With my suspension setup, they have never rubbed in anyway at all front or rear. cheers

I don't think the gold part is a separate spigot ring, I think it is part of the spacer. I believe they are a combined spacer/centre bore adaptor (see pic below). I assume you will have to remove the black spacer/gold spigot and fit a correct spigot ring for your wheels and shorter bolts.

You would definitely need to do further mods to fit those Bentley wheels to a T6 or T6.1, the centre bore is too small for T6/6.1 as well as the PCD being different as already stated.

...by others, my speedo is now a total match for gps through the range. Fitment appears tight in places but no rubbing whatsoever. Significantly more comfy than the 18's I had on too. Centre bore on these is direct fit, however certainly my alloys are tapered seat so couldn't use the factory bolts.

Thanks so much for your helpful advice, it really is a minefield. Great photos, the van looks stunning on these wheels. Just about the perfect ride height for my tastes too, how low have you gone?

This is brilliant thanks a lot Matt. 60 and 80mm looks good

They sure look good. Will one of those new wheels fit in the spare wheel space?

Hi @j4ckal the hub spacer comes off on its own.

10mm H&R 5x120 65mm centre bore, google that and you should find some oh and make sure they’re hubcentric