It was a blown interior light fuse that was causing all the problems.
Why this was effecting the rear lights I’ve no idea.
But that’s what caused it.
I’ve also got my bumper and bonnet DRLs working. I kept them off the light circuit and took them to an ignition feed in the fuse box beside the...
At £20, my redundant H4 headlights took a couple of months to sell to someone using them temporarily on a T5 to T6 front end conversion. The replacement H7 headlights I bought were a direct fit for me. The only Carista coding needed was to make the dip and main bulbs stay on when on full beam...
Hi, I'm looking for the part number for a drlbulb holder on a 2014 t5.1, mine has worn and the light keeps going out, if I wiggle the bulb it come on again
Can someone tell me how to adjust the alignment of the original H15 halogen high beam headlights in a T6.1 van??
Having fitted LED bulbs, I want to lower the DRL and High Beam slightly because they are too high.
I’ve spent hours trying to find documentation to show what screws / where the screws...
...Bulbs (Pair) H7 lights will need 2 pairs of these bulbs.
582 7440 Twenty20 Elegance Canbus LED's 12V W21W LED DRL's. The Twenty20 Led DRLbulbs will need the following Canbus kit to stop a Bulb warning on your dash.
VW T6 Transporter LED Fog Light Upgrade | eBay
You might be able to source a...
With my new loom extender I have tried out the old light. The fault is not seen.
While you may think the fault is then with the headlight, I have replaced the entire unit. So there are no common parts.
A thought I did have is the current pull difference between an LED and the bulb of the...
I have installed the following bulbs in my DRL's, I tried different bulbs from Tewnty20 but due to their form factor I couldn't get them to fit in the light housing and dind't fancy taking the headlight unit off the van to install...
...of a PITA to get in even with the headlamp out on the bench)
Also there is a known fault with the H7 DRL holder which can be fixed with a new bulb holder which has wires attached. Also referenced earlier in the thread.
If your having a lot of trouble with H7 DRLbulbs then the holder is the...
Hi guys...
Quick question that someone may be able to help with hopefully... A friend has a set of DRL's in his bumper that seem to flicker/pulse when headlights are on and engine is running, they work as they should when engine is off.
Connections are as follows;
DRL Wiring;
Black -...
Update, just for anyone searching this in future:
Just spoke to THQ, who have advised the problem will be due to me having the aftermarket DRL bumper inserts fitted. Options are to either code out the bulb warning with Vagcom, or to remove/disconnect the DRL inserts.
Just fitted some H7s with the ones bought off MrSkip. It's worth noting that the coding for keeping the dipped bulbs on while using main beam is essential and makes a massive difference. I also fitted LEDs to the DRLs so it's also worth changing the coding to turn off the relevant DRL when...
New headlights today … happy with the look and the brightness !
Travelin-lite
T6 LED DRL Headlights V3 Black Edition (Osram Blue intense bulbs H7 & H1)
So I have got my xenon headlights all set up with the correct bulbs in every lamp. I have tried a quick test using the Kufatec xenon to halogen wiring loom adaptors.
I have got everything working. The xenon works in both low beam and the gate lifts to give me high beam. High beam second lamp...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.