Search results for query: grommet

I would if you could mate.

The loom on the camera isn’t long enough for that but I could probably route the other side of the loom (originating from the dash) through that grommet and connect everything up in the plastic trim. That’s a good suggestion thanks 👍

Can you not use the grommet where the loom comes through for the registration lights? Just a thought rather than cut holes in the door?

...all the way to the back of the van, but my setup with the thule aero / wing bars allows (short) surfboards to be mounted in front of the panel. Obviously they will cast some shade depending on orientation, but they don’t cover the panel. Cable runs down to the rear light wiring loom grommet.

...strange indeed, and I'm hoping it was the crud that was blocking the drain hole, and in heavy and persistant rain the level was reaching a grommet in the bulkhead that cables pass through. Time will tell, but it's looking promising at the moment, so many thanks to all the people on this...

Thank you,it all he great information, thank you

...still have to bring the cables in and connect stuff up. It also gives you chance to sound deaden the cab. Remove the Starter Battery and the grommet is easily accessible behind there. Push your cable through and it’s easy to find behind the wheel arch noise insulation. If you route under the...

That is good to know, I guessed someone with the knowledge would point something useful out!:)

There is a grommet through the bulkhead in the plenum chamber behind the battery.

...Along the roof beam and down the B pillar inside if I remember right. I had to take the plugs off to get them through the pop-top. Rubber grommets going through each panel. The housing for the entry to the van is glued on with Sikaflex. Since this picture, I glued on some cable guides...

...camera in the light position in my barn door. I’ve run the wire to the back doors on the passenger side. My van is fully converted so I’m wondering where the access is to the grommet so I can run the wire through, my van has carpeted panels etc. Any photos would be brilliant. Thanks in advance

...maybe there is a misunderstanding on the photos, the first one is from front to back, the second one is the other way around, I saw that both sides have 2 small grommets that hold a small cable on top and 1 bigger grommet that holds the brake cable but only on the back. 3 grommets in total...

Sounds like a load of unenforceable nonsense to me - who the hell would ever know you had a porta potty in your van in the first place? Are they relying on some form of Maoist Cultural Revolution-style snitching by your spouse and children?

It'd need to be vented outside if I'd been in there!

...so my porta potti is no longer acceptable. Furthermore the fixed toilet needs to be vented to the outside. Q - So before I go searching is there any existing holes through the floor where I could run a 1/2 inch vent. pipe? Maybe under the driver or passenger seat currently with a sealing grommet.

yes one one for the hydraulic hose. The grommet my still be on the hose but just not pushed into the bracket on the shock base, as it is on the second picture.

Are you talking about the picture n1? Could i put a new one without unplug the cable?

It looks like a grommet missing for the brake hose as well.

Thanks Deaky. I wasn't very clear, but I was referring to the second grommet (now circled). I assume answer is probably the same though!

...already asked. I've tried searching but didn't find an answer. I'm wiring up my DC to DC charger. I've got the positive coming through the grommet behind the battery. However, the next grommet (to path out of this tray) is already full. In the videos/posts I've seen they all go through...