jamstonmart
Member
Everyday is a school day. You've only given me an idea now.
To retrofit a MK6 dcc to a MK5.
tHANKS @iichel
To retrofit a MK6 dcc to a MK5.
tHANKS @iichel
Have a look here as well: DCC on Golf Mark 5
Just make sure you have the 55mm struts/hub carriers at the front.
Just make sure you have the 55mm struts/hub carriers at the front.
edistyle_rs
New Member
Good afternoon!
The post is really interesting and I read it all. I write here what happened to me so maybe you can help me because is directly releated.
I bought a T6 wilt coilovers installed. Then I realized that the van was coming from factory with DCC so I bought the dampers and install it with lowering springs.
I plug the damoers but nothing change in the van.
This is the log I get, like the DCC module id nor conected or similar. Was not warning light or similar, so I supposed that the previous owner did something to deactivate it.
Can someone help me? Any ideas?
Thanks a lot!
The post is really interesting and I read it all. I write here what happened to me so maybe you can help me because is directly releated.
I bought a T6 wilt coilovers installed. Then I realized that the van was coming from factory with DCC so I bought the dampers and install it with lowering springs.
I plug the damoers but nothing change in the van.
This is the log I get, like the DCC module id nor conected or similar. Was not warning light or similar, so I supposed that the previous owner did something to deactivate it.
Can someone help me? Any ideas?
Thanks a lot!
Code:
Tuesday,20,December,2022,20:57:51:00009
VCDS -- Windows Based VAG/VAS Emulator Running on Windows 8.1 x64
VCDS Version: 20.4.2.0 (x64)
Data version: 20200730 DS317.0
www.Ross-Tech.com
VIN: WV2ZZZ7HZGH059472 License Plate:
Chassis Type: 7H-VN75 (7E0)
Scan: 01 03 04 08 09 10 13 14 15 17 18 19 25 3C 55 5F 61 69 0B
VIN: WV2ZZZ7HZGH059472 Mileage: 147640km-91739miles
01-Engine -- Status: OK 0000
03-ABS Brakes -- Status: OK 0000
04-Steering Angle -- Status: OK 0000
08-Auto HVAC -- Status: OK 0000
09-Cent. Elect. -- Status: OK 0000
10-Park/Steer Assist -- Status: OK 0000
13-Auto Dist. Reg -- Status: OK 0000
14-Susp. Elect. -- Status: Cannot be reached 1100
15-Airbags -- Status: OK 0000
17-Instruments -- Status: OK 0000
18-Aux. Heat -- Status: OK 0000
19-CAN Gateway -- Status: Malfunction 0010
25-Immobilizer -- Status: OK 0000
36-Seat Mem. Drvr -- Status: Malfunction 0010
3C-Lane Change -- Status: OK 0000
55-Headlight Range -- Status: Malfunction 0010
5F-Information Electr. -- Status: OK 0000
61-Battery Regul. -- Status: OK 0000
69-Trailer -- Status: OK 0000
-------------------------------------------------------------------------------
Address 01: Engine (2D2D2-CXFA) Labels:. 04L-907-309-V2.clb
Part No SW: 04L 906 056 KM HW: 04L 907 445
Component: R4 2.0l TDI H02 6186
Revision: 23002001
Coding: 0019401C434401080000
Shop #: WSC 02737 790 50316
ASAM Dataset: EV_ECM20TDI03004L906056KM 004013
ROD: EV_ECM20TDI03004L906056JS_004.rod
VCID: 020B3F0F950F189605-8056
No fault code found.
Readiness: N/A
-------------------------------------------------------------------------------
Address 03: ABS Brakes (J104) Labels: 7E0-907-37x-MK100ESC.clb
Part No SW: 7E0 907 379 P HW: 7E0 907 379 M
Component: ESC H05 0132
Revision: 00000000 Serial number: 42785000000617
Coding: 307E4098256784870C79027DA48421D378F500
Shop #: WSC 02739 790 50316
ASAM Dataset: EV_Brake1ESCCONTIVN75XGP2 011001
ROD: EV_Brake1ESCCONTIVN75XGP2_011.rod
VCID: 3F8DF6FBA67DB57E2A-806A
No fault code found.
-------------------------------------------------------------------------------
Address 04: Steering Angle (G085) Labels:* 6R0-959-654.clb
Part No SW: 6R0 959 654 HW: 6R0 959 654
Component: LENKW.SENSOR H07 0070
Serial number: 15101513470638
Coding: 01
Shop #: WSC 00000 000 00000
ASAM Dataset: EV_LWSKLOVW25X 005001
ROD: EV_LWSKLOVW25X.rod
VCID: 7EF34BFFE1F77C7661-802A
No fault code found.
-------------------------------------------------------------------------------
Address 08: Auto HVAC (J255) Labels:| 7E5-907-040.clb
Part No SW: 7E0 907 040 HW: 7E0 907 040
Component: ClimatronicT5 H02 0508
Revision: 00001K03
Coding: 0000000103
Shop #: WSC 02737 790 50316
ASAM Dataset: EV_ClimatronicT5 A01003
ROD: EV_ClimaAutoT5Basis.rod
VCID: 60CF15877B43AA8673-8034
Slave 1:
Subsystem 1 - Part No SW: 7E5 907 049 C HW: 7E5 907 049 C
Component: Heckbedienung H11 0303
Serial number: BHB-0011210150015264
No fault code found.
-------------------------------------------------------------------------------
Address 09: Cent. Elect. (J519) Labels:. 7E0-937-BCM-V1.clb
Part No SW: 7E0 937 090 HW: 7E0 937 090
Component: BCM PQ25 Max4 H80 0736
Revision: B9080001 Serial number: 0771 293150658
Coding: B8A039BA0A61349293284F606CEB87D4C0A4738960CD79603204003F0860
Shop #: WSC 39775 001 104857
VCID: 68DF0DA79B73D2C6BB-803C
Subsystem 1 - Part No: 5K7 955 559 B Labels: 5K7-955-559.CLB
Component: RLS 301015 03 37 0059
Coding: 0228EE
Subsystem 2 - Part No SW: 7E0 959 801 J HW: 7E0 959 801 J Labels: 7E0-959-80X-V2.CLB
Component: J386__TSG_FT 003 8654
Serial number: KU0KU023091552661013
Coding: 0400A3
Subsystem 3 - Part No SW: 7E0 959 802 J HW: 7E0 959 802 J Labels: 7E0-959-80X-V2.CLB
Component: J387__TSG_BT 003 8654
Serial number: KU0KU023091552666639
Coding: 1400A3
Subsystem 4 - Part No: 7E1 951 171
Component: DWA-Sensor 00 001 0104
Coding: 000000
Subsystem 5 - Part No: 1K0 951 605 C
Component: LIN BACKUP HO H05 1501
Coding: 000000
Subsystem 6 - Part No: 7E1 951 171
Component: DWA-Sensor 00 001 0104
Coding: 000000
Subsystem 7 - Part No SW: 7E0 959 442 A HW: 7E0 959 442 A Labels: 3C8-959-537.CLB
Component: E221__MFL-DC1 H02 0103
Serial number: 29150001904400125393
Coding: B4FFFF
No fault code found.
-------------------------------------------------------------------------------
Address 10: Park/Steer Assist (J446) Labels:| 7E0-919-475.clb
Part No SW: 7E0 919 475 N HW: 7N0 919 475
Component: PARKHILFE 8K H06 0205
Revision: -------- Serial number: 28261523300304
Coding: 318009
Shop #: WSC 93651 188 12345
ASAM Dataset: EV_VW75XParkAssis8K 001007
ROD: EV_VW75XParkAssis8K_001_VN75.rod
VCID: 3D718CF3AC71A76E38-8068
No fault code found.
-------------------------------------------------------------------------------
Address 13: Auto Dist. Reg (J428) Labels:| 7N0-907-572.clb
Part No SW: 7N0 907 572 A HW: 7E0 907 572
Component: ACC Bosch PQx H03 0110
Serial number: 25091577091664
Coding: 00004000FE0779
Shop #: WSC 01383 790 50316
ASAM Dataset: EV_ACCBEGVW361 001004
ROD: EV_ACCBEGVW361.rod
VCID: 3467A9D79F3B6626C7-8060
No fault code found.
-------------------------------------------------------------------------------
Address 14: Susp. Elect.
Cannot be reached
-------------------------------------------------------------------------------
Address 15: Airbags (J234) Labels:| 5K0-959-655.clb
Part No SW: 7E0 959 655 E HW: 7E0 959 655 E
Component: VW10Airbag00A 008 0016
Revision: -------- Serial number: 003PJ000NGKK
Coding: 000000000000000000000000000000003041
Shop #: WSC 02734 790 50316
ASAM Dataset: EV_AirbaVW10BPAVW12X 001028
ROD: EV_AirbaVW10BPAVN750.rod
VCID: 387F9DE783538246EB-806C
Crash sensor for side airbag: driver side:
Serial number: 3495ZRB40673FGI6N8I3
Crash sensor for side airbag: front passenger side:
Serial number: 3505ZRB405V3FGI6BH1+
No fault code found.
-------------------------------------------------------------------------------
Address 17: Instruments (J285) Labels:| 5K0-920-xxx-17.clb-SRI1
Part No SW: 7E0 920 880 L HW: 7E0 920 880 L
Component: KOMBI H05 1008
Serial number: 00000000000000
Coding: 170F010400
Shop #: WSC 02737 790 50316
ASAM Dataset: EV_Kombi_UDS_VDD_RM09 A05730
ROD: EV_Kombi_UDS_VDD_RM09_005_VW31.rod
VCID: 3365AACB9A35611EDE-8066
No fault code found.
-------------------------------------------------------------------------------
Address 18: Aux. Heat (J364) Labels:| 7E0-963-27X-18.clb
Part No SW: 7E0 963 273 HW: 7E0 963 273
Component: STH-T5GP2 002 0007
Coding: 4001
Shop #: WSC 02737 790 50316
ASAM Dataset: EV_AuxilParkiHeateWOST5G2 001010
ROD: EV_AuxilParkiHeateWOST5G2.rod
VCID: 6ADB77AF8D7FE0D6AD-803E
No fault code found.
-------------------------------------------------------------------------------
Address 19: CAN Gateway (J533) Labels:. 7E0-909-901.clb
Part No SW: 7E0 909 901 HW: 7E0 937 090
Component: GW-K-CAN TP20 H80 0736
Revision: B9080001
Coding: 04220D
Shop #: WSC 39775 001 104857
VCID: 68DF0DA79B73D2C6BB-803C
1 Fault Found:
00471 - Control Module for Elect. Regulated Dampers (J250)
004 - No Signal/Communication
Freeze Frame:
Fault Status: 01100100
Fault Priority: 2
Fault Frequency: 1
Reset counter: 236
Mileage: 147647 km
Time Indication: 0
Date: 2017.05.12
Time: 20:51:38
-------------------------------------------------------------------------------
Address 25: Immobilizer (J334) Labels:| 5K0-920-xxx-25.clb
Part No SW: 5K0 953 234 HW: 5K0 953 234
Component: IMMO H05 1008
Serial number:
Coding: 000000
Shop #: WSC 00000 000 00000
ASAM Dataset: EV_Immo_UDS_VDD_RM09 A03710
ROD: EV_Immo_UDS_VDD_RM09_VW31.rod
VCID: 6ADB77AF8D7FE0D6AD-803E
No fault code found.
-------------------------------------------------------------------------------
Address 3C: Lane Change (J769) Labels:| 5Q0-907-566.clb
Part No SW: 7E0 907 566 C HW: 4H0 907 566 F
Component: SWA Master H07 0030
Serial number: 0383721776
Coding: 030311
Shop #: WSC 02739 790 50316
ASAM Dataset: EV_LaneChangAssis 001028
ROD: EV_LaneChangAssis_VN75.rod
VCID: 306FA5C76B235A06A3-8064
Lane Change Assistant 2:
Subsystem 1 - Part No SW: 7E0 907 568 C HW: 4H0 907 568 F
Component: SWA Slave H07 0030
Serial number: 0383620758
Coding: 030311
No fault code found.
-------------------------------------------------------------------------------
Address 55: Headlight Range (J431) Labels:. 6R0-907-357.clb
Part No SW: 6R0 907 357 C HW: 6R0 907 357 B
Component: AFS-ECU 005 0050
Revision: -------- Serial number: --------------
Coding: 0FC2020001000000
Shop #: WSC 02757 790 50316
ASAM Dataset: EV_HeadlRegulVWLWRCC 002006
ROD: EV_HeadlRegulVWLWRCC.rod
VCID: 3A7B87EFBD5F90561D-806E
1 Fault Found:
13705473 - Databus
U1121 00 [137] - Missing Message
[New feature! Extended UDS fault detail is only supported by current gen. interfaces]
MIL ON - Confirmed - Tested Since Memory Clear
Freeze Frame:
Fault Status: 00000001
Fault Priority: 6
Fault Frequency: 1
Reset counter: 236
Mileage: 147647 km
Date: 2022.12.20
Time: 20:51:36
-------------------------------------------------------------------------------
Address 5F: Information Electr. (J794) Labels:| 5G0-035-MIB-STD2.clb
Part No SW: 5K7 035 200 D HW: 5K7 035 200 D
Component: MU-S--ER H22 0245
Serial number: VWZAZ2R8945926
Coding: 06570000FF00000011110001000808001F0100D40020010003
Shop #: WSC 14824 003 104857
ASAM Dataset: EV_MUStd4CTSAT 001022
ROD: EV_MUStd4CTSAT_VW32.rod
VCID: 2541449324E10FAE40-8070
No fault code found.
-------------------------------------------------------------------------------
Address 61: Battery Regul. (J840) Labels:. 1K0-907-534.clb
Part No SW: 7E0 907 534 HW: 7E0 937 090
Component: Batt.regelung H80 0736
Serial number: 0771 293150658
Coding: 330B1A73
Shop #: WSC 02739 790 00000
VCID: 68DF0DA79B73D2C6BB-803C
Subsystem 1 - Part No SW: 7E0 915 181 G HW: 7E0 915 181 G
Component: J367-BDM H08 0223
Serial number: 62271C45361261750521
No fault code found.
-------------------------------------------------------------------------------
Address 69: Trailer (J345) Labels:. 1K0-907-383-V2.clb
Part No SW: 1K0 907 383 H HW: 1K0 907 383 G
Component: Anhaenger H12 0130
Revision: 3B001001 Serial number: 00000382508708
Coding: 410D000103000000
Shop #: WSC 02739 790 00000
VCID: 326BAFCF6D2F6816D5-8066
No fault code found.
End-------------------------(Elapsed Time: 04:10)--------------------------
Last edited by a moderator:
edistyle_rs
New Member
The module is present. I already check it to understand if it was unplugged or similar.
Do you know where and which is the fuse?
Thanks a lot.
Do you know where and which is the fuse?
Thanks a lot.
edistyle_rs
New Member
Is working! The dash shows the message and the button has light. Is flashing so sure some error or similar that I need to check with VCDS.
Thanks a lot!!!
If it flashes it is telling you that there is a fault , VCDS will tell you which shock is problematic
The system cant work while the light flashes if i recall
edistyle_rs
New Member
Exactly.
I check it and it says Front left and Rear right OPEN CIRCUIT and MIL ON. I check the other 2 and they are working properly and the previous owner of the socks told me that no issues before.
I hope the problem is the conectors because they were some time out son for sure some corrosion in the pins (Even that I use some contact cleaner and WD-40 before install it). I will check it and let you know.
Thanks a lot for your great help.
edistyle_rs
New Member
I already checked and inside the connector, the pins were in a really bad way.
I try to recover them and the front damper now is not giving the error.
The rear one still couldn't solve but I will keep trying.
Anyway, do you know if exist a repair kit for this connectors? The one I need to repair is already change or this is my feeling.
I check a bit on google but couldn't find anything.
Thanks a lot for your help.
I try to recover them and the front damper now is not giving the error.
The rear one still couldn't solve but I will keep trying.
Anyway, do you know if exist a repair kit for this connectors? The one I need to repair is already change or this is my feeling.
I check a bit on google but couldn't find anything.
Thanks a lot for your help.
edistyle_rs
New Member
I get something but I need to compare carefully to understand if it is the same.
Attached you can find my conector and then the link to get a new one with the reference:
Link to connector
Attached you can find my conector and then the link to get a new one with the reference:
Link to connector
edistyle_rs
New Member
Hello and merry christmas to all of you!
Sorry to don´t post it before, but I solve the issue. Front one was just some corrosion in the conector pins, but the rear one has a previous modification with change of the conector, It was not good and also the corrosion went through the cable. I cut all, replace the cables and redo it, and now is working properly.
Thanks a lot for the help!
Sorry to don´t post it before, but I solve the issue. Front one was just some corrosion in the conector pins, but the rear one has a previous modification with change of the conector, It was not good and also the corrosion went through the cable. I cut all, replace the cables and redo it, and now is working properly.
Thanks a lot for the help!
My rear DCC shocks are installed.
I know, I am slow but trying to catch up.
View attachment 171259View attachment 171260View attachment 171261
I am going to try stick the front ones in over the course of next few days, weather permitting.
By the way, there will be a full set of ordinary shocks in very good condition for sale soon.
A bit of further progress
.
*viewer discretion* changing shocks is a very dangerous job. Dont be that 1%. #spankslife #comedy #shocks #mechaniclife | Nathan Shanks | Nathan Shanks · Original audio
1.1M views, 6.5K likes, 828 comments, 1.8K shares, Facebook Reels from Nathan Shanks: *viewer discretion* changing shocks is a very dangerous job. Dont be that 1%. #spankslife #comedy #shocks...
www.facebook.com
Agree it doesn't look professional, but it works.
A number of strong cable ties is the safest and the most reliable way in my opinion.
RS PRO Cable Tie, 380mm x 7.6mm, Black Nylon, Pk-100 | RS
I think you are very close to your goal! (but I'm not far behind you)
I can say that I almost did everything! but I ran into the fact that I can not perform a BASIC INSTALLATION! The reason for this is my lack of attention! I did not change the rear sensor and move it from the right side to the left (as required by the circuit). Now the readings of this sensor are beyond reasonable limits. so for anyone who plans to install a DCC in the future, I recommend purchasing the correct sensor (just moving it does not work, there is a difference in the brackets) I will still try to upgrade the existing sensor since all the wiring is already laid and the vibration sensor is fixed on the right side (above the height sensor body)
