What Have You Bought Today?

Test run on the bench, well, back seat of my scooter (with an engine). Both reels linked together, no seeming voltage drop in the second reel, just need the one relay from the Cerbo.
Synchronized perfectly, happy teddy!
I use a lot of active pixel lights in projects, it's very much good practise to power both ends if possible.

Remember each individual pixel is actually 3 (red, green and blue) so maximum power draw is being "white" when all 3 are on. It's a quirk of the way LEDs work that red and green need lower forward voltage than blue so what you see is when set to white the white will turn to more orange white the further away from the power input it is as the blue LED loses power.
 
I use a lot of active pixel lights in projects, it's very much good practise to power both ends if possible.

Remember each individual pixel is actually 3 (red, green and blue) so maximum power draw is being "white" when all 3 are on. It's a quirk of the way LEDs work that red and green need lower forward voltage than blue so what you see is when set to white the white will turn to more orange white the further away from the power input it is as the blue LED loses power.
Makes a lot of the sense, but do they peak at plus or minus 5% of the apparent centre of negativity?!
Fortunately the cerbo has 2 relay inputs, not a difficult job to pop the other end in the other hole (technical speak), thank you RT.
 
Back
Top