What Have You Done To Your Van Today?

If you consider swapping the lower dash panels from grey to black you might find the heater control unit isn’t the same.

IMG_6934.jpeg

However a quick go with the Milwaukee die grinder and it’s easy to split them apart to make the one you want

IMG_6936.jpeg

Also fitted the combined amp/sub after a fair bit of faffing around only to find it fouls on the seat so needs to be fettled around and set at a different angle.

IMG_6946.jpeg
 
Managed to get some ramp time today thanks to a fellow dubber.

Plan was to get the clutch and flywheel replaced and do the pulleys whilst she is in the air.

Defeated by stubborn driveshafts and run out of time so it's been rescheduled.

PXL_20230722_064158138.jpg
 
That’s exactly what it is. Without it, you tend to get very wet when you open the door as the water from the pop top cascades down - as I found out very quickly after mine was converted!

If you’ve got an awning rail fitted, it does the same thing.
Do you know where to get them from?
Now its raining I have the same thing happening to me.
Thanks
 
What was the issue with the driveshafts?
We spent too much time trying to free them from the hubs and by the time we realised we could take them off at the gearbox and secure them out of the way, we didn't have enough left to actually get the subframe and gearbox off
 
It’s been a busy morning, until the rain stopped me in my tracks.

I am hoping these Only Charged Dubs (OCD) compressor mounts minimise the compressor noise and vibration further as they hold the compressors away from the body.

Weather permitting they should be sorted tomorrow.

IMG_8367.jpeg

IMG_8366.jpeg

IMG_8369.jpeg

IMG_8370.jpeg
 
It’s been a busy morning, until the rain stopped me in my tracks.

I am hoping these Only Charged Dubs (OCD) compressor mounts minimise the compressor noise and vibration further as they hold the compressors away from the body.

Weather permitting they should be sorted tomorrow.

View attachment 206684

View attachment 206685

View attachment 206686

View attachment 206687
Fully fitted, I can hardly hear the compressors in the van now. With the engine running I can’t tell when they are running.

Super mod and well worth the effort.

IMG_8372.jpeg
 
Back
Top