Which Reversing Camera?

[Psm1975]

sorry another question on the Wolfbox g900
Hi does this bracket also fit the T 6.1 ? as seen most comments about t6 ( if so i need to get one on order !) thanks

Did you manage to get an answer to this at all?

 

[Psm1975]

This is my T6.1. Appears quite different. One sensor appears to be in the bracket, another seems to be in the mirror. No idea where to go now with fitting my wolfbox. ‍



Edit to add: anyone with a t6.1 with the same bracket as me, I’ve solved the problem on another thread:

T6.1 mirror replacement

I’ve searched the forum, but don’t see anything to answer my latest question. I’ve bought a Wolfbox G900 dashcam / rear view mirror. Research on here showed that I needed a bracket to go between the wolfbox mirror and the bracket on the screen. I’ve gone to fit the wolfbox and the bracket is...

www.t6forum.com

 

[Sydney2london]

Help! My van is already lined, have run the cable to the top corner area (inside), need now to get it through to the rear light, camera already fitted to barn door. Any suggestions please.....thanks.

Hi, how did you solve this? I have the exact same issue. Was thinking of carefully drilling through next to the wiring loom but would line advice. Thanks

 

[MrAPC]

Hi, how did you solve this? I have the exact same issue. Was thinking of carefully drilling through next to the wiring loom but would line advice. Thanks

I used a piece of cable puller I had laying around (yellow and plastic) my cable for the alpine unit was pretty small, and fished it down from inside and then pulled it through the rubber shield and into the barn door itself

 

[Sydney2london]

I used a piece of cable puller I had laying around (yellow and plastic) my cable for the alpine unit was pretty small, and fished it down from inside and then pulled it through the rubber shield and into the barn door itself

Thanks! how did you get into the van from the wiring on the door? Did you drill into the cabin next to the wiring?

 

[Psm1975]

I wiggled a piece of wire (think coat hanger) down the rubber bellows and pulled wires back with the small loop I made on the end. A bit fiddly, but possible.

 

[MrAPC]

I used the same cable puller and abit of lube to pull it through the rubber boot as well