PM me and I could send you some woods for the trees.
MIB2 PQ Discover Media - Infotainment mods, upgrade, FEC / SWaP
- Thread starter Robert
- Start date
Mehkor
Member
Hi Robert,
Are you able to disable asr / esc from settings menu ? And control aux heater also ?
Thank you
TheKolonel
Member
Not yet
but ASR/ESC is probably going to be impossible because the switch over between these 2 options is done via ABS coding.
Taking into account remaining range,
spot the difference
View attachment 124484
View attachment 124485
View attachment 124486
To get full range shown correctly some adjustments are required, in the meantime some cool reversing while refuelling
TheKolonel
Member
Dear community,
Has anyone managed to add Traffic Sign Assist to a VW T6? I wonder if I need to unlock some codes SWAP codes...
In VCDS I do not have the 5A channel despite the fact I have ACC, front assist and side assist.
Has anyone managed to add Traffic Sign Assist to a VW T6? I wonder if I need to unlock some codes SWAP codes...
In VCDS I do not have the 5A channel despite the fact I have ACC, front assist and side assist.
Guys, any advice apreciated, so successfully updated my mib2 pq from 0252 to 0478. Now it takes a about minute to establish Android Auto (tried diffrent usb cables, no luck) and its dropping connection afer 20/30mins. With 0252 software I didnt experienced this. Just to add carried out update with media port (5q0035726e) unplugged. Any ideas??? Cheers
Hi, is it possible to enable Vehicle Information menu + grid layout in my MST2_EU_VW_PQ_P0478T, 5C0035680F? I have enabled offroad menu by following steps from MIB2 PQ Discover Media - Infotainment FEC / SWaP and MIB2 PQ Discover Media - Infotainment FEC / SWaP but that's not what I really need.
I have also patched CP with mib toolbox and enabled some FEC/SWaP but still I don't know how to achieve gird layout + vehicle information menu. Any advices?
Thanks
I have also patched CP with mib toolbox and enabled some FEC/SWaP but still I don't know how to achieve gird layout + vehicle information menu. Any advices?
Thanks
Shammy7861
New Member
Hi Mate,
I hope your well and good will you please be willing enough to help me out I am borrowing my dad's mates VCDS and have seen your post on Ross Tech regarding EOL and am on the same bought as you. Looked high and low but can't find it anywhere what I need to do to activate it so then I can enter the SwaP codes I have.
I have retro fitted a MIB2STD in my mk6 golf all work's including off road but want to see if Sports Performance works.
Thanks Sham
So EOL activation is limited to Uwe (RT) telling people, we have been asked not to publish how you enter EOL mode. What I can tell you is that you have to type a code in the 5F module and a new session is created.
Sorry, but no one would tell me and I had to personally ask Uwe how to enter EOL session.
Sorry, but no one would tell me and I had to personally ask Uwe how to enter EOL session.
Hi all! I registered just to express my gratitude to TheKeymeister for the amazing software update guide. I was successful in upgrading from 363 to 478. Thank you to TheKeymeister and all the determined people before me.
I did have a questions for other who have done the same: I noticed VCDS can no longer find a compatible label file for long coding, so I have no description of bytes. Has this happened to anyone else?
I did have a questions for other who have done the same: I noticed VCDS can no longer find a compatible label file for long coding, so I have no description of bytes. Has this happened to anyone else?
yeah done this upgrade on my Tiguan and I have no issues with VCDS, are you using the latest VCDS software? I use HEX2 with no issues.
Thanks for letting me know yours works. I checked my release version, and I did have an update (I usually keep my diagnostics tablet offline). All is now well on 22.3. Cheers!
