Show us your 3D printed modifications

excactly what I am planing to do now, just with different text.
Would you mind sharing the files? Source would be absolutely briliant :)
I am the source myself, as I created the model myself :);)
I'm attaching two files for you: the CAD file (both sides) and the STL file (right side only). You can add text as you see fit and adjust the length as you like. I hope you can handle the file format. Feel free to post a picture when you're finished!

 
Has anyone or can anyone 3d print a flat panel to go in the dash to the right of the steering wheel to hold a sub controller?

1743600562531.png
 
I removed the original cup holder on the drivers side dash and reprinted it as a phone holder. I bought a phone USB Dock Station and took out the cable. The cable mounts into the bottom of the new 3D part. The USB plugs into the dash socket, removed and routed under the dash.
So now I can drop my phone into the cup-dock, and use Android Auto on the OEM radio.20250402_175920.jpg20250402_180102.jpg20250402_180127.jpg
 
I am the source myself, as I created the model myself :);)
I'm attaching two files for you: the CAD file (both sides) and the STL file (right side only). You can add text as you see fit and adjust the length as you like. I hope you can handle the file format. Feel free to post a picture when you're finished!

Geat! Thank you very much!

I had to go with STL, which is not ideal, since non-commercial Fusion 360 does not like DWG (only DXF... and converters suck).

I'll share what I will come up with!
 
I’m trying to find if someone ever made a Brodit Proclip type bracket to attach a phone holder to voor a T6. Does anyone here know of a STL for this?
 
Back
Top