(Side Assist) / (Blind Spot Detection & Rear Cross Traffic Alert) retrofit

id love this . . . . .

But as i always have LWB vans VW tell me that i cant have it !!!!!

why is it available on SWB and not LWB - nobody can give ma an answer? VW just say its not available on LWB so tuff!!

id be interested . . . . . . depending on cost.

id assume its:

rear quarter radar detectors?
looms?
possible module?
side mirrors with SA indication?
bit of coding?

might be time for a bit of schematic digging?


nice bit of info from @Loz over here > Side Assist

.
 
nice . . .


Product information "Complete set side assist for VW T6"
  • Complete set to retrofit the original side assist for VW T6
  • Intelligent technique for avoiding dangerous situations or accidents during lane change
  • The installed radar sensors (left and right site in the rear bumper) monitors the rear area and the area beside the vehicle from a speed of 30 km/h
  • The system measures the distance and the different speed between you and the other vehicles
  • Indicators in both exterior mirrors alert about critical situations

Scope of delivery:

  • Wiring set
  • Radar sensors
  • Mount for radar sensors
  • Indicators for exterior mirrors

Note:

  • for vehicles without rain-/ light sensor (PR-No.: 8N1) this must be retrofitted
  • After installation you need to code the vehicle. Please get in contact with your local VW dealer or workshop
  • The delivered hardware partly comes from test vehicles and went through a compreshensive functional test. The software is up to date
  • The exterior mirror covers are not part of the delivery and need to be ordered separetly by using your chassis number

https://www.kufatec.com/en/my-manuals/download/?id=7073
 
might be worth an email to Kufatec and ask if it fits on LWB and SWB . . . . . see what they say.
 
Just give them your VIN and they will confirm compatibility.
 
  • Like
Reactions: mmi
am not sure VIN check works like that for LWB

it could be
- just no as default answer from VW since it has never been fitted to a LWB
- requires longer harness
- attachment points not available in lwb vs swb
- maybe the length of the vehicle does not match anymore in the software and it doesn't always work well enough

until someone attempts it we'll never know for sure...
 
Wiring is very simple
Page 16.png

but this calibration makes me wonder

Page 20.png
 
  • Love
Reactions: mmi
well, once it is installed, can you bring it to a vw garage so they calibrate it.
it's not always possible to do everything by 1 person/ 1 location...
 
Only P&P with =rear hatch , once you have barn door not easy,.
Side assistance module is place under lights ,
I made in my with barn doors, I mounted it lower...... under bumper on site tow hitch
still need pull wires , but look good
 
Pre-owned modules don't need to be calibrated(credit to @spacewalker ;))and they are way cheaper.
Just bought 2 units with 2 brackets and 2 plugs for £100 delivered.

Zrzut ekranu z 2019-09-12 14-42-12.png

Unfortunately it is very hard to buy pre-owned LED warning lights for mirrors cause most people sell them as complete mirror units.
I found 2 new ones for £90 delivered so have to digest it somehow now.:laugh:

Zrzut ekranu z 2019-09-12 14-38-55.png
 
Last edited:
  • Like
Reactions: mmi
I have asked Kufatec for a SIDE ASSIST wiring loom on its own earlier on.
And believe or not but they have added new item to their online shop.;)
KUFATEC
 
Last edited:
I have it standard on my Kombi, it switches off when you have trailer on too, then you need to remember to reactivate it once you disconnect the trailer.
 
You must log in or register to reply here.

Similar threads

DubHaus
Multiple Retrofits, Side Assist, Trailer Assist and Park Assist - VCDS help required please
2 3
Replies
54
Views
4K
DubHaus
DubHaus
Back
Top