Nice and simple. Neat work - well done youFollowing on - I cut 2 short lengths of SS pipe at 450mm long. Lowered the carrier and located the anti-theft device onto the carrier and around the SS pipe. Greased the threads of both bolts then inserted the 90mm security bolt through the carrier, then through the ant-theft device, then through the SS pipe and engaged it in the threads on the carrier bracket. Once the 90mm bolt had gone into place a short way I put the second shorter bolt through the carrier, then through the SS pipe and entered it into the threads on the carrier bracket. I tightened each bolt evenly until each respective section of SS pipe was clamped and sandwiched tight between the carrier and the carrier bracket at the same time shrouding and protecting the exposed length of the 2 threaded carrier bolts. The carrier is now bolted up tight to the carrier bracket without compressing the side walls of the 17" spare tyre. I will in due course change the shorter bolt for another 90mm bolt which will make life easier when accessing the spare.
View attachment 155760
View attachment 155761
View attachment 155762
View attachment 155763
View attachment 155764