What Have You Done To Your Van Today?

Fixed an annoying rattle in the passenger side A panel trim and continued my journey towards Team Tango with a bit of vinyl on the rear logo. Took a couple of pictures of it to share as I’ve not seen any of the rear logo stripped down before
F424A44F-DAA7-4D5A-A8E9-5F7CAD29BB9B.jpeg5D919948-83BC-42CC-940F-DF66C4CB167B.jpeg58EBE29D-A8C0-4F4B-A3F9-BBCF6DD762D6.jpeg5D919948-83BC-42CC-940F-DF66C4CB167B.jpeg
 
While the wife was upcycling some free chairs with black hammerite ...she ask’s do I want the lower suspension arm painting....well I had to think for a minute...but as she’s spraying me caliper yellow....I couldn’t not so no! :whistle:
69ACDC9E-D604-4884-BE10-40368418F2FE.jpegE8ACB3E1-D168-4E05-8FD8-D7C1562998A0.jpeg
 
4 months after fitting the front dash cam, made a little wooden bracket attached with M4 well nuts into the 8mm trim holes for the rear facing camera. With barn doors didnt want it on the glass. 4/10 for aesthetics 9/10 for functionality!

6AA98C75-8C51-4FB6-AE87-BAFD15E0A83E.jpeg

7CDE22AA-5804-4E66-B6E1-C3B66337CE6B.jpeg
 
After ordering it back in November, I’ve finally got round to fitting the replacement middle-section for the Van-X splitter

4847B698-6C0C-4F86-B1B9-E792E745FFDC.jpeg

I used this stuff years ago and then couldn’t find it again.. plastic weld. Lifesaver!
8BE46159-58CA-414F-8A60-463D846E0CB2.jpeg

The missing parts that I made up came out better than the broken bits I welded back on!
3BECF6F3-3D3B-4248-8CE5-9BBECF4E9FD5.jpeg
 
Back
Top