New brake rotors and pads uneven rotor wear.

[kliklakloe]

Can someone please point me in the right direction on this? I just replaced my front brake rotors and pads, tried to bed them in and drove about 100km's since then now my rotors look like this on both sides! I have done everything how it is supposed to be done, used the workshop manual and various youtube videos. all went well replacing the parts. I tried searching online but cannot find a similar problem. It seems only the top half of the rotors on both sides are touching the pads.

 

[Bigsidavies]

Have you got the large front brakes? Looks like you’ve got normal size discs where you should have the 340mm discs.
Big brakes are usually on the biturbo or 4 motion versions I think. Mine biturbo certainly has them.
If you have 17” Devonports and they only just miss the caliper then you’ve got the larger brakes.
That’s all I can think of.

 

[kliklakloe]

Thanks for your reply, that is however not the case. same rotors as came off the van. (308mm) I do not have a t32 or 4motion or biturbo or anything special, just a t28 camper conversion.